Using The Sheet Bypass; Common Features - Panasonic DP-130 Operating Instructions Manual

Using the Sheet Bypass

For 2-sided copying or to copy on letterhead, mailing labels, transparencies
and odd-size paper, etc., or to use the bypass as an additional paper source.
1
2
3
4
5
When using 2-sided copies, do not set more than 25 (20 lbs.) sheets in bypass.
C
NOTE
Some types of mailing labels and transparency film may damage your
C
machine. Contact your service provider for advice regarding non-standard
paper types.
When sheet bypass has no paper, "P" will appear on Copy Count Display.
C
Position original.
Select copy ratio/size.
(See page 15, 16)
Open the sheet bypass.
Open the tray.
Tray
# Place paper into the tray. (Up to
$ Adjust the side guides to paper
Side Guides
Select sheet bypass with Paper
Tray key.

Common Features

50 sheets)
Insert the paper until it stops.
Do not fill above.
Copy side down for copying
on letterhead paper and
mailing labels.
width.
Incorrect adjustment may cause paper
to wrinkle, misfeed or skew.
17