Release Scanner/Remove shipping materials
Reminder: Do not plug the copier until directed to do so.
1
2
3
4
5
Do not plug in copier until set-up is complete.
C
ATTENTION
Bottom view
Setup Procedure
Remove the fixing screw for the
optics unit.
Pull paper tray out of copier and
secure the screw to the bottom of
the paper tray.
Note: When moving the copier reinstall
the fixing screw.
# Completely remove the paper
tray from the copier.
$ Release the shipping tapes
(2 pieces) from the bottom.
% Push the bottom plate lock
button.
Remove the shipping tapes from
the bottom plate. (2 pieces)
# Remove the shipping tape.
$ Open the sheet bypass.
% Push the button.
& Open the right cover.
11