System Speed Dial - Inter-Tel Associate Display Phone User Manual

TIP:
To dial outside telephone numbers without first selecting an outgoing line,
enter a line access code (such as the Outgoing Call code "8") before the outside
telephone number.
To view how your Station Speed-Dial keys are currently programmed:
With the handset in the cradle, dial
1.
Press the desired Station Speed-Dial key. The name and number are displayed.
2.
Press
3.
NOTE:
This option is only available for display phones.
To erase a Station Speed-Dial name and/or number:
With the handset in the cradle, dial
1.
Dial the desired location code (0-9) or press the desired Station Speed-Dial key.
2.
Press
3. MUTE
Press
4.
Press
5. MUTE
Press
6.
Dialing Station Speed-Dial Numbers
To dial a Station Speed-Dial number:
If necessary, select an outgoing line. You have the following options:
• To use a location number: Dial
phone has one) and then enter the desired Station Speed-Dial location number (0-
9).
• To use a Station Speed-Dial key: Press the desired Station Speed-Dial key.

System Speed Dial

Your System Administrator can store up to 1000 speed-dial numbers in System
Speed-Dial locations 000-999.
To view and/or dial System Speed-Dial numbers:
Press
1. SYS SPDL
Dial the location code (000-999) for the desired number.
2.
Press
3.
Eclipse Associate Display and Basic Digital Phone User Guide
to exit.
#
repeatedly until the name is erased.
to continue.
#
repeatedly until the number is erased.
to exit.
#
or dial
3 8
to dial the number.
#
.
3 9 6
.
3 8 3
(or press the
3 2
8
.
1
key, if your
STA SPDL
49