Removing a board
►
Open the casing (see "Opening the casing" section).
For workstations with a fan only:
►
Remove the fan (see "Remove the fan").
►
Disconnect the cables connected to the board.
1
►
Press the unlocking mechanism (1) down and open the locking rail (2). The word "PRESS" is
embossed on the unlocking mechanism.
►
Pull the board out of the slot (3).
►
Place the board into appropriate packaging.
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
!
compatibility) regulations, you must refit the slot cover.
A26361-K665-Z125-1-7619, Edition 1
2
3
System expansions
41