Table of Contents
Advertisement
As an example, your machine is installed in the United Kingdom, is to
be used for both fax and voice calls, and your national telephone number
is 0161-444 5555, then you must set the fax and telephone number parts
of your station ID as: +44 161-444 5555
1
For the FAX-8250P, Press Menu, 1, 3.
For the FAX-8650P, Press Menu, 1, 1, 3.
The screen prompts you to enter your fax number.
2
Enter your fax number (up to 20 digits). The screen displays your
See
"Entering
entry.
Text"
3
Press Set. The screen prompts you to enter your telephone number.
in this
chapter
4
Enter your telephone number (up to 20 digits). If your telephone
number and fax number are the same, enter the same number again.
The screen displays your entry.
5
Press Set. The screen prompts you to enter your name or your
company name.
6
Use the dial pad to enter your name (up to 20 characters). (You can
use the following chart to help you enter letters.)
Press Set to confirm.
7
8
Press Stop. The screen returns to the date and time.
The telephone number you have entered is used only for the Call
Back Message and Cover Page features.
If you do not enter a fax number, no additional information can be
entered.
To enter a space, press
characters.
If your Station ID has already been programmed, the screen prompts
"1" to make a change, or "2" to exit without changing.
Entering Text
When you are setting certain functions, such as the Station ID, you may
need to enter text into the machine. Most keys on the dial pad have three
or four letters printed above them. The keys for 0, #, and
printed letters because they are used for special characters.
FAX:
TEL:
NAME:
once between numbers and twice between
I N I T I A L S E T U P
don't have
31
Advertisement
Table of Contents
