Storing Your Own Sound Adjustments - JVC KD-S6060 Service Manual

Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
SCM
SCM
Ex.: When you select "SOFT"
2
To adjust the bass or treble level.
1 Select "BAS" (bass) or "TRE" (treble).
SEL
Ex.: When you select "TRE" (treble)
2 Adjust the level.
To turn on or off the loudness
function.
LOUD
16
• See page 15 for details.
• See page 14 for details.
3
Repeat step 2 to adjust the other
items.
4
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
SCM
Your adjustment made for the
selected sound mode is stored
in memory.
SCM
5
Repeat the same procedure to store
other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values
listed in the table on page 15.