Kodak Pixpro SP1 User Manual page 83

Message
82
Description
Connecting to the computer USB
Connecting to the HDMI device
Caution will appear before power off when the
battery of the product is already dead.
The firmware cannot be updated when power
is insufficient.
The message will be displayed when the
temperature of the battery reaches 70 °C
during recording.
When the AP setting is enabled, the message
will be displayed when the temperature of the
battery is in the range from 65 to 70 °C.
Reset Mode
The display is ended after
connection is succeeded.
It will shut down after
displaying for 2 seconds.
A message appears to prompt
updating after full charging and
returning to the update screen.
It will shut down automatically
in 2 seconds, and can be
recovered to use only after the
temperature is reduced.
Return to the menu interface
in 2 seconds and recover use
only after the temperature is
reduced.