Kodak Pixpro SP1 User Manual page 101

3. Assemble the base, pre-tightening handle and plane support (large) according to the
direction illustrated in the Picture. First press the base into the plane support (large), and
then rotate and tighten the pre-tightening handle.
4. Tack the double-sided adhesive at the bottom of the plane support (large) and the plane
support (small) to the object to be used.
Double-sided adhesive is disposable. It can be purchased separately and replaced if
needed.
100
Base
Pre-tightening Handle
Plane Support (Large)