Table of Contents
Advertisement
Connection setting method of the
product and the smart device:
Step 1: setting up the product
1. Press
in the viewfinder status, select
「AP Settings」, and press
wireless connection function so that the
SSID interface in 「AP mode」 appears.
SSID and WPA2 password messages are
displayed in the interface.
AP mode
SSID:PIXPRO-SP1_1234
WPA2-PSK:12345678
Wireless connection process takes
about 30 seconds. At this moment,
except for
, other buttons are
deactivated.
Step 2: setting up the smart device
1. Enable the wireless function of the smart
device to search surrounding wireless
devices;
3. Select the name of the action cam to be
to enable
connected (PIXPRO-SP1_XXXX), and
input the eight-digit digital password
displayed next to WPA2-PSK on the
action cam;
3. Download the special APP installation
package (APP name: PIXPRO SP1) from
the device appropriate APP store, and
install;
4. Click the icon of the APP
the APP.
Step 3: set up completion
1. Once the APP is connected to the
action cam, functional operations can
be enabled on the smart device. If there
is a need to interrupt the connection,
press
appears, select
connection, and return to the SSID
interface;
to enable
, so that the selection interface
, press
, interrupt
55
Hide quick links:
Advertisement
Table of Contents
