Kodak Pixpro SP1 User Manual page 59

iOS system:
1. When the APP is enabled for the first time, if the position service is enabled, it will prompt
whether to not 「"PIXPRO SP1 " would like to use your current location」; if the position
service is disabled, it will prompt 「Turn on Location Services to allow "PIXPRO SP1" to
determine your location」; and if clicking 「setting」, the smart device position service
setting interface will appear.
2. When the APP is enabled for the second time or later, status of position service:
Position service
state selected
at the first-time
enabling of the APP
Enable
Off
58
The second-time or later enabling of the APP
The position service is
enabled
Enable the position
service
A prompting message that「Location Service is disabled. Please
enable Location Service for PIXPRO SP1.」; and if clicking 「OK」,
the APP home interface will appear. Besides, the position service
will be automatically disabled.
The position service is Off
A prompting message 「Turn on Location
Services to allow "PIXPRO SP1" to
determine your location」will appear; and
if clicking 「setting」, the smart device
position service setting interface will
appear.