Toshiba Satellite P300 Maintenance Manual page 190

Replacement Procedures
Installing Second HDD-H9.5mm / HDD-H12.5mm
The following describes the procedure for installing a HDD (See Figure 4-3 to 4-4).
9. Install a HDD to the HDD holder and secure it with the following screws.
• M3.0×3.5F
NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kg-cm for
four screws securing the HDD holder.
10. Insert the HDD assembly into the HDD slot and connect it carefully to the MAIN
HDD on the system board.
11. Secure the HDD assembly with the following screw.
• M2.5×4.0B
Satellite P300 and Satellite Pro P300 Maintenance Manual (960-Q08)
FLAT BIND screw
FLAT BIND screw
4-21
x4
x2