Toshiba Satellite P300 Maintenance Manual page 113

5. Address pattern test
Subtest 02 Protected Mode
This subtest first writes data patterns and address data from 1 to 32 MB, then
reads the new data and compares the result with the original data patterns.
Addresses are displayed in 64KB increments during the test.
. Test Process:
1. Byte Enable Test
2. Byte Enable Test
3. Data bus test
4. Fixed data test
5. Address pattern test
Subtest 03 Protected Mode [32MB - MAX]
This subtest first writes data patterns and address data from 32MB to the
maximum installed memory, reads the new data, and then compares the result
14
"16 bit write and 16 bit read" of address pattern data is executed and
the new data is compared with the original data.
Test data = 0000H, 0004H, 0008H, 000CH,...8000H, 8004H, through
FFECH
One bit write/ 8 bit read" is executed and the new data is compared
with the original data.
Test data = CCAA5533H, 80000000H
"One bit write/16 bit read" is executed and the new data is compared
with the original data.
Test data = CCAA5533H, 80000000H
"One bit write/16 bit read" is executed and the new data is compared
with the original data.
Test data = 1H, 2H, 4H, 8H, 10H, through 80000000H.
"16 bit write/ 16 bit read" is executed and the new data is compared
to the original data.
Test data = FFFFFFFFH, 00000000H, 80018001H
"16 bit write and 16 bit read" of address pattern data is executed and
the new data is compared with the original data.
Test data = 0000H, 0004H, 0008H, 000CH,...8000H, 8004H, through
FFECH
Satellite P300 and Satellite Pro P300 Tests and Diagnostics Manual
Test Program for Field.