Toshiba P300 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite P300
  6. User manual

Toshiba P300 User Manual

Notebook computer
Hide thumbs Also See for P300:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual , User Manual
User's Manual
P300/P300D Series
computers.toshiba-europe.com

Advertisement

Table of Contents
loading

Related Manuals for Toshiba P300

Summary of Contents for Toshiba P300

  • Page 1 User’s Manual P300/P300D Series computers.toshiba-europe.com...
  • Page 2 P300/P300D Series Copyright © 2008 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 3: When Using Your Computer

    Adobe Systems Incorporated. Bluetooth is a registered trademark owned by its proprietor and used by TOSHIBA under license. ConfigFree is a trademark of TOSHIBA Corporation. The HD DVD Logo is a trademark of DVD Format/Logo Licensing Corporation. DVD MovieFactory is a trademark of the Ulead Systems, Inc.
  • Page 4 1999/5/EC which includes the compliance to the Electromagnetic Compatibility Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC. CE Marking is the responsibility of TOSHIBA EUROPE GmbH, Hammfelddamm 8, 41460 Neuss, Germany, phone +49-(0)-2131-158-01. For a copy of the related CE Declaration of Conformity please refer to the following website: http://epps.toshiba-teg.com.

  • Page 5: Working Environment

    Any consequences resulting from the use of this product in working environments that are not approved or the use is restricted are not the responsibility of Toshiba Corporation. The consequences of the use of this product in those working environments may be: ■...
  • Page 6 P300/P300D Series Modem warning notice Conformity Statement The equipment has been approved to [Council Decision 98/482/EC - "TBR 21"] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in...

  • Page 7: Optical Disc Drive Safety Instructions

    Your computer model may be ENERGY STAR Compliant. If the model ® you purchased is compliant, it is labeled with the ENERGY STAR logo on the computer and the following information applies.TOSHIBA is a partner in ® the Environmental Protection Agency’s (EPA) ENERGY STAR Program ®...
  • Page 8 P300/P300D Series Hitach-LG Data Storage DVD Super Multi GSA-T40F/GSA-T40N ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 9 P300/P300D Series Panasonic DVD Super Multi UJ-870B ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 10 P300/P300D Series Pioneer DVD Super Multi DVR-KD08 ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 11 P300/P300D Series TOSHIBA SAMSUNG STORAGE TECHNOLOGY CD-RW/DVD-ROM Drive TS-L462D ■ The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 12 P300/P300D Series TOSHIBA SAMSUNG STORAGE TECHNOLOGY 8x slim DVD Writable Drive TS-L632H ■ This DVD writable drive employ a laser system to ensure proper use of this product, please read this instruction manual carefully and retainfor future reference. Should the unit ever require maintenance, contact an authorized service location-see service procedure.
  • Page 13 P300/P300D Series TOSHIBA HD DVD-ROM Drive SD-L802B ■ This HD DVD-ROM drive employ a laser system to ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location-see service procedure.
  • Page 14 P300/P300D Series TOSHIBA HD DVD-RW Drive SD-L912A ■ This DVD writable drive employ a laser system to ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location-see service procedure.
  • Page 15 P300/P300D Series International Precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station."...

  • Page 16: Important Notice

    Dispose of used batteries according to the manufacturer's instructions. Use only the battery pack that came with the computer or an optional battery pack. Use of wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. User’s Manual...

  • Page 17: General Precautions

    P300/P300D Series General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 18: Instruction Manual For Safety And Comfort

    P300/P300D Series Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical...

  • Page 19: Table Of Contents

    Special features ......... 1-12 TOSHIBA Value Added Package ......1-13 Utilities and Applications.
  • Page 20 TOSHIBA Disc Creator ........4-25...
  • Page 21 TOSHIBA support ........

  • Page 22: Manual Contents

    This manual tells you how to set up and begin using your P300/P300D Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
  • Page 23 P300/P300D Series Chapter 5, Keyboard, describes special keyboard functions including hot keys. Chapter 6, Power and Power-Up Modes, gives details on the computer's power resources and battery save modes. Chapter 7, HW Setup explains how to configure the computer using the HW Setup program.
  • Page 24 P300/P300D Series When procedures require an action such as clicking an icon or entering text, the icon’s name or the text you are to type in is represented in the type face you see to the left. Display Names of windows or icons or text generated by the computer that appears on its display screen is presented in the type face you see to the left.

  • Page 25: Introduction

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.

  • Page 26: Features

    Introduction ■ TOSHIBA HD DVD PLAYER* (HD DVD model only) ■ TOSHIBA FingerPrint Utility *(FingerPrint support model only) ■ TOSHIBA SD Memory Utilities ■ TOSHIBA Disc Creator ■ TOSHIBA Face Recognition* ■ TOSHIBA Acoustic Silencer ® ■ Ulead Movie Factory for TOSHIBA* ■...
  • Page 27 Introduction Memory Slots PC2-5300 (PM965/GM965/RS690M)/PC2-4200 (GL960) 512 MB, 1024 MB or 2048 MB. Up to 2 GB memory module can be installed in the memory slot for a maximum of 4 GB (PM965/GM965/M690G), 2 GB (GL960) system memory total, depending on the model you purchased.
  • Page 28 Introduction Video RAM Depending on the model you purchased. ® Mobile Intel GM965 Express Chipset/Mobile ® Intel GL960 Express Chipset model: Video RAM capacity shares with main memory, and the proportion depends on Dynamic Video Memory Technology. ® Mobile Intel GM965 Express Chipset/Mobile ®...
  • Page 29 Introduction Disks Hard disk Disclaimer 1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 2 = 1,073,741,824 bytes, and therefore shows less storage capacity.
  • Page 30 Introduction DVD Super Multi drive Some models are equipped with a full-size DVD (Supporting DVD±R Super Multi drive module that lets you record data to rewritable CD/DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor.
  • Page 31 Introduction HD DVD-ROM Some models are equipped with a full-size HD DVDROM drive module that lets you run CD's or DVD's without using an adaptor. The drive reads DVD-ROM's at a maximum 8x speed and CD-ROM's at a maximum 24x speed, and HD DVD's at a maximum 1x speed and writes CD-R's at up to 16x speed, CD-RW's at up to 10x speed, DVD-R's and DVD+R's at up to 4x speed,...
  • Page 32 Introduction HD DVD-RW drive Some models are equipped with a full-size HD DVD-R drive module that lets you run CD's or DVD's without using an adaptor. The drive reads DVD-ROM's at a maximum 8x speed and CD-ROM's at a maximum 24x speed, and HD DVD's at a maximum 1x speed and writes CD-R's at up to 16x speed, CD-RW's at up to 4x speed, DVD-R's and DVD+R's at up to 4x speed,...

  • Page 33: Pointing Device

    Appendix B, Display Controller and Modes for more information. Keyboard Built-In TOSHIBA Vista keyboard, 104 keys or 105 keys with numeric keypad, compatible with IBM enhanced keyboard, dedicated cursor control, keys. Refer to Chapter 5, Keyboard, for details.
  • Page 34 Introduction Slots ExpressCard The ExpressCard expansion slot that can accommodate two standard module formats; an ExpressCard/34 module and an ExpressCard/54 module. An ExpressCard module is a small add- in card technology based on the PCI Express and Universal Serial Bus (USB) interfaces. Multiple Digital Media Supports SD/SDHC memory card, MMC, Card Slot...
  • Page 35 Introduction Wireless LAN Where present, it supports the A,B,G and draft N standards but it is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE 802.11 Standard. ■ Automatic Transmit Rate Select mechanism in the transmit range of 54, 48, 36, 24, 18, 12, 9 and 6 Mbit/s.

  • Page 36: Special Features

    Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hot Keys Key combinations let you quickly modify the system configuration directly from the keyboard without running a system configuration program.

  • Page 37: Toshiba Value Added Package

    *1 Click , Control Panel, System and Maintenance, and then click Power Options. TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA Power TOSHIBA Power Saver provides you with the Saver features of more various power supply managements.

  • Page 38: Utilities And Applications

    The TOSHIBA Accessibility utility provides Accessibility support to movement impaired users when they need to use the TOSHIBA Hot-key functions. In use, the utility allows you to make the Fn key "sticky", that is you can press it once, release it, and then press one of the "F"...
  • Page 39 TOSHIBA DVD-RAM TOSHIBA DVD-RAM Utility has a Physical Utility Format function and Write-Protect function to DVD-RAM. This utility is contained in the TOSHIBA Disc Creator setup module. To run TOSHIBA DVD-RAM Utility, click , select All Programs, TOSHIBA, CD&DVD Applications, and then click DVD-RAM Utility.
  • Page 40 Video. It has an on-screen interface and functions. (Provided with some models) (Depending on configuration) TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks.

  • Page 41: Options

    * The availability of DDRII depends on the model you purchased. Battery pack An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare to increase your computer operating time. AC Adaptor If you use your computer at more than one site...

  • Page 42: Chapter 2 The Grand Tour

    The Grand Tour Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer's front with its display panel in the closed position.
  • Page 43 The Grand Tour Power LED The Power indicator glows blue when the computer is on. If you select Sleep Mode from Turn Off Computer, this indicator flashes orange (one second on, two seconds off) while the computer enters Sleep Mode. Battery LED The Battery indicator shows the condition of the battery's charge: Blue indicates a full charge,...

  • Page 44: Left Side

    The Grand Tour Left side The following figure shows the computer's left side. External Monitor Cooling Vents Universal Serial Express Port Bus (USB 2.0) Card Slot TV Out HDMI i.LINK Port port Jack (IEEE 1394a) Port The left side of the computer External Monitor Port This 15-pin port lets you connect an external video display.

  • Page 45: Right Side

    The Grand Tour i.LINK (IEEE1394a) This port allows you to connect an external Port device, such as a digital video camera, for highspeed data transfer. (Provided with some models) Right side The following figure shows the computer's right side. Eject Security Button Indicator...

  • Page 46: Backside

    The Grand Tour DC IN 19V Jack The AC adaptor connects to this socket. Use only the model of AC adaptor that comes with the computer. Using the wrong adaptor can damage your computer. Backside The following figure shows the computer's back panel. The backside of the computer Underside The following figure shows the underside of the computer.

  • Page 47: Front With The Display Open

    The Grand Tour Hard Disk Cover This cover protects the hard disk. Battery Pack Lock Slide this lock to prepare the battery pack for removal. Battery Pack The battery pack powers the computer when the AC adaptor is not connected. For detailed information on the battery pack, refer to Chapter 6, Power and Power-Up...
  • Page 48 CD/ DVD Button Pressing this button will launch an application program that allows for playing of CDs or DVDs. The application that is launched differs by model: Windows Media Player/TOSHIBA DVD PLAYER/TOSHIBA HD DVD PLAYER. (Provided with some models) Play/Pause Button Press this button to begin playing an audio CD, a DVD movie or digital audio file.

  • Page 49: Optical Disc Drive

    The Grand Tour TouchPad A TouchPad located in the centre of the palm rest is used to control the on-screen pointer. Fingerprint Sensor Just by swiping the finger against the fingerprint sensor, the following functions will be enabled: Log-on to Windows and access a security- enabled homepage through IE (Internet Explorer) Files and folders can be encrypted/decrypted and third party access to them prevented.

  • Page 50: Notes On Use

    The Grand Tour About the HD DVD This section describes the features, use of HD DVD and HD DVD Media. Summary HD DVD allows users to enjoy video, concerts and other packaged content by taking advantage of its large amount of storage space and high-quality audio and video.

  • Page 51: Writable Discs

    The Grand Tour ® ■ Dolby Digital audio enhancements are only supported by Microsoft ® Windows operating system. Content with high sample rates of 48kHz or more are downsampled when output through either the built-in speakers or headphone jack. ■ This device supports AACS (Advanced Access Content System) next generation copy protection technology.
  • Page 52 The Grand Tour DVD Super Multi drive (Supporting DVD±R DL) The full-size DVD Super Multi drive module lets you record data to writable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the centre of a disc and faster at the outer edge.
  • Page 53 The Grand Tour HD DVD-RW drive The full-size HD DVD-RW drive module lets you run either 12 cm (4.72") HD DVDs,12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the centre of a disc and faster at the outer edge.

  • Page 54: Ac Adaptor

    Use only the AC adaptor that came with the computer or an equivalent optional adaptor. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. ■ Use only the AC Adaptor supplied with your computer or an equivalent adaptor that is compatible.

  • Page 55: Remote Controller (Provided With Some Models)

    The Grand Tour Remote controller (Provided with some models) A remote controller, which is provided with some models, enables you to perform some functions of your computer from a distant location. You can use your remote controller with Media Center to play CDs, DVDs and videos, to view pictures.
  • Page 56 The Grand Tour Power Starts or terminate the operating system.This button functions like the power button of your computer. By default, the Sleep mode is equivalent to the power off state of your computer. To change the setting, click Start Control panel System and Maintenance...

  • Page 57: Using The Remote Controller

    The Grand Tour Replay Moves media backward (seven seconds for videos, one music track or one DVD chapter at a time). Stop Stops the media currently playing. Skip Moves media forward (30 seconds for videos, one music track or one DVD chapter). Using the remote controller Some computers include a remote control unit, which allows you to control some of your computer’s functions from a distant location.
  • Page 58 The Grand Tour Even if within the effective scope as described above, the remote controller may malfunction or not work correctly in the following cases. ■ When an obstacle stands between the infrared receiver window of your computer and the remote controller. ■...

  • Page 59: Type Of Battery That Can Be Used For The Remote Controller

    The Grand Tour Type of battery that can be used for the remote controller When the provided batteries run down, please replace them with adequate ones. CR2016 type battery is available. Other types or battery should not be used. Installing the batteries 1.

  • Page 60: Placing Slim Size Remote Controller

    The Grand Tour Slim size remote controller 1. Open the battery cover on the back side of the remote controller. 2. Hold down the stopper and slide the battery out of battery case. Stopper Battery Removing the batteries 3. Insert the battery in place. Be sure to place the batteries with correct polarities.

  • Page 61: Chapter 3 Getting Started

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.

  • Page 62: Connecting The Ac Adaptor

    Getting Started 4. Secure the Battery Pack Lock to ensure the battery is locked into place. Later, when you want to remove the battery you must disengage this lock first. Battery Battery Pack Release Lock Latch Securing the battery pack Refer to Removing the battery pack section in Chapter 6,...
  • Page 63 Use only the AC adaptor supplied with your computer or an equivalent adaptor that is compatible. Use of any incompatible adaptor could damage your computer. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor. ■...

  • Page 64: Opening The Display

    Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer.

  • Page 65: Windows Vista™ Setup

    Getting Started Turning on the power Windows Vista™ setup When you first turn on the power, the computer's initial screen is the ® Microsoft Windows Vista™ Startup Screen Logo. Follow the on-screen directions. Be sure to read the Windows End User License Agreement display carefully.

  • Page 66: Sleep Mode

    Getting Started Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge. Sleep Mode If you have to interrupt your work, you can turn off the power without exiting from your software. Data is maintained in the computer's main memory. When you turn on the power again, you can continue working right where you left off.

  • Page 67: Hibernation Mode

    Getting Started ■ Click , click power button located in the power management buttons , or click arrow button and select Sleep from the menu. ■ Close the display panel. This feature must be enabled. Please refer to the Power Options (to access it, click Control Panel System and Maintenance...

  • Page 68: Starting Hibernation Mode

    Getting Started Benefits of Hibernation Mode The Hibernation Mode feature provides the following benefits: ■ Saves data to the hard disk when the computer automatically shuts down because of a low battery. ■ You can return to your previous working environment immediately when you turn on the computer.

  • Page 69: Restarting The Computer

    The procedure is as follows. Follow the instructions shown on the on- screen menu. 1. Turn off the computer. 2. Turn on the computer and when the TOSHIBA screen appears repeatedly press the F8 key. 3. The Advanced Boot Options menu will be displayed.
  • Page 70 Getting Started Restoring the pre-installed Software Depending on the model you purchased, different ways for restoring the pre-installed software are offered: ■ Creating optical Recovery Discs ■ Restoring the pre-installed software from your created Recovery Discs. ■ Restoring the pre-installed software from the Recovery hard disk drive ■...
  • Page 71 2. While holding down F12 key on the keyboard, turn on your computer - when the TOSHIBA logo screen appears, release the F12 key. 3. Use the cursors key to select the CD-ROM icon from the menu. Please...
  • Page 72 When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. 1. Turn off the computer. 2. Turn on the computer and when the TOSHIBA screen appears repeatedly press the F8 key. 3. The Advanced Boot Options menu will be displayed.
  • Page 73 Getting Started 4. A menu will be displayed from which you should follow the on-screen instructions. 5. If your computer came with additional software installed, this software can not be recovered from the Product Recovery DVD-ROM. Re-install these applications (e.g. Works Suite, Games, etc.) separately from other media.

  • Page 74: Chapter 4 Operating Basics

    Operating Basics Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad, optical media drives, sound system, modem, the wireless LAN and LAN. It also provides tips on caring for your computer. Using the TouchPad To use the TouchPad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.

  • Page 75: Using The Fingerprint Sensor (Fingerprint Sensor Is Provided With Some Models)

    Operating Basics Do not press on the TouchPad too hard or press a sharp object such as a ball point pen against the TouchPad. The TouchPad could be damaged. For some functions, you can tap the TouchPad instead of pressing a control button.
  • Page 76 Operating Basics 3. Ensure the center of the fingerprint is on the sensor when swiping the finger. Slide the finger over the recognition sensor ■ Avoid swiping with the finger stiff or pressed-on too hard: Fingerprint reading may fail if the center of the fingerprint is not touching on the sensor, or when finger is swiped while pressing hard.
  • Page 77 Operating Basics Observe the following before you place your finger on the sensor whether for fingerprint enrollment/registration or recognition. ■ Wash and dry your hands thoroughly. ■ Remove static electricity from your fingers by touching any metal surface. Static electricity is a common cause of sensor failures, especially when the weather is dry.

  • Page 78: Fingerprint Sensor Limitations

    Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times.Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.

  • Page 79: Fingerprint Registration

    Operating Basics Set up procedure Please use the following procedure when first using fingerprint authentication. Fingerprint registration Enroll the required authentication data using the Fingerprints Enrollment Wizard. ■ The fingerprint authentication uses the same Windows logon ID and password. If the Windows logon password has not been setup, please do so before registration.

  • Page 80: Fingerprint System Boot Authentication

    ■ It is necessary to register the User Password before using the fingerprint Pre-OS feature and its extended function, the fingerprint Single Sign-On feature. Please use TOSHIBA HW Setup to register the User Password. ■ If you fail fingerprint authentication more than five times, you must enter the User Password or Supervisor Password manually to start the computer.

  • Page 81: How To Enable Fingerprint System Boot Authentication

    Password and Windows Logon password before using the fingerprint Pre- OS feature and this fingerprint Single Sign-On feature. Please use TOSHIBA HW Setup to register your User Password. Only one fingerprint authentication is required to replace the User Password (and, if selected, the HDD user and Supervisor passwords) and Windows Logon password.

  • Page 82: Usb Sleep And Charge Function

    TOSHIBA does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.

  • Page 83: Using The Web Camera

    Operating Basics Metal paper clips or hair pins/clips will generate heat if they come into contact with USB ports. Do not allow USB ports to come into contact with metal products, for example when carrying the computer in your bag. How to enable/disable USB sleep and charge function You can set enable/disable USB sleep and charge function in HW setup Refer to the...

  • Page 84: Using The Software

    Operating Basics Using the software The web camera software is pre-configured to start when you turn on Windows Vista; if you need to restart it go to Start All Programs Camera Assistant Software Camera Assistant Software. Capture Still Video Audio Images Recording Recording...

  • Page 85: Using The Microphone

    Operating Basics Settings Choose from the: Options tab to change the tool bar position; the Picture tab to select picture output options such as size, export file and save path; the Video tab to choose video output settings such as Frame Rate, Size, Compression and the frame rate, size, record compressor, and save path;...

  • Page 86: Loading Discs

    Operating Basics Loading discs To load a disc, follow the steps below and refer to the figures. 1. a. When the power is on, press the eject button to open the drawer slightly. Eject Button Pressing the eject button b. Pressing the eject button will not open the drawer when the disc drive's power is off.
  • Page 87 Operating Basics 2. Grasp the drawer gently and pull until it is fully opened. Pulling the drawer open 3. Place the disc, label side up, in the drawer. Inserting a disc User’s Manual 4-14...
  • Page 88 Operating Basics When the drawer is fully opened, the edge of the computer will extend slightly over the disc tray. Therefore, you will need to turn the disc at an angle when you place it in the tray. After seating the disc, however, make sure it lies flat, as shown in the figure above.

  • Page 89: Removing Discs

    Operating Basics Removing discs To remove the disc, follow the steps below and refer to the figure. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical media drive indicator to go out before you open the drawer.

  • Page 90: Writing Cd/Dvd With The Dvd Super Multi Drive Or Hd Dvd-Rom Drive Supporting Dvd±R Dl

    Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM discs. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 91 Operating Basics DVD Specifications for Recordable Disc for DVD-RW: Version 1.1 or 1.2 Victor Company of Japan, Ltd. (JVC) MITSUBISHI KAGAKU MEDIA CO, LTD. MITSUBISHI KAGAKU MEDIA CO, LTD. DVD+RW: DVD Specifications for DVD-RAM Disc for DVD-RAM: Version2.0, 2.1 or 2.2 Hitachi Maxell Ltd.

  • Page 92: When Writing Or Rewriting

    LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator is not recommended. When writing or rewriting Please observe/consider the following when you write or rewrite to a CD-R/ -RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.

  • Page 93: Writing Cd/Dvd/Hd Dvds On Hd Dvd-Rw Drives

    ■ CD-R/RW media cannot be accessed using the Create CD/DVD option in Media Center. ■ To write data to CD-R/RW media, use the TOSHIBA Disc Creator feature that is installed on your computer. User’s Manual 4-20...

  • Page 94: Important Message

    RAM. HD DVD-R. HD DVD-R(Dual Layer) or HD DVD-RW media, however, it must be noted that disc quality can affect write or rewrite success rates. Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc.
  • Page 95 Operating Basics TAIYO YUDEN CO., LTD. CD-R: MITSUBISHI KAGAKU MEDIA CO., LTD. RICOH Co., Ltd. Hitach Maxell Ltd. (High-Speed, Multi Speed) CD-RW: MITSUBISHI KAGAKU MEDIA CO., LTD. RICOH Co., Ltd. (Ultra-Speed) CD-RW: MITSUBISHI KAGAKU MEDIA CO., LTD. DVD Specifications for Recordable Disc for DVD-R: General Version 2.0 TAIYO YUDEN CO., LTD.
  • Page 96 Operating Basics ■ If the disc is poor in quality, or is dirty or damaged, writing or rewriting errors may be noted - ensure that you check all discs for dirt or damage before you use them. ■ The actual number of rewrites to CD-RW, DVD-RW, DVD+RW, DVD- RAM or HD DVD-RW media will be affected by the quality of the disc itself and the way in which it is used.
  • Page 97 CD/DVD/HD DVD - do not try to write from shared devices such as a server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator has not been confirmed, therefore operation with other software applications cannot be guaranteed.

  • Page 98: Toshiba Disc Creator

    TOSHIBA Disc Creator cannot record in packet format. ■ You might not be able to use the "Disc Backup" function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW, HD DVD-R, HD DVD- R(Dual Layer) or HD DVD-RW disc that was made with other software on a different optical media recorder.

  • Page 99: Data Verification

    Operating Basics ■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs - to achieve this you should use Windows Explorer or another similar utility. ■ When you back up a DVD disc, be sure that the source drive supports...
  • Page 100 Simplified steps for making a DVD-Video from adding video source: 1. Click All Programs DVD MovieFactory for TOSHIBA Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 1. Click Video Disc New Project to invoke 2 Launcher, choose your project type, then invoke MediaFactory.

  • Page 101: Important Information For Use

    Operating Basics Important information for use Note the following limitations when you write video DVD: 1. Editing digital video ■ Log in with Administrator rights to use DVD MovieFactory. ■ Make sure that your computer is running on AC power when using DVD MovieFactory ■...

  • Page 102: Media Care

    Operating Basics ■ Please verify your disc after recording important data. ■ DVD-R/+R/-RW disc cannot be written in VR format. ■ Not support to output VCD or SVCD format. 3. About Straight to Disc ■ Not support to record on DVD-R/+R disc ■...

  • Page 103: Modem

    To select a region, follow the steps below. 1. Click start, point to All Programs, TOSHIBA, Networking, and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.

  • Page 104: Modem Selection

    Operating Basics Settings You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. Open the Dialling Properties dialog box after selecting region The dialing properties dialog box will be displayed automatically after you select the region.
  • Page 105 Operating Basics Connecting To connect the modem cable(optional), follow the steps below. ■ The modular cable that comes with the computer must be used to connect a modem. Connect the end of the modular cable with the core to the computer. ■...

  • Page 106: Using The Fm Tuner

    Operating Basics Using the FM tuner The availability of this feature is depending on the model you purchased. 1. Plug the FM tuner antenna into the FM Antenna Jack. FM tuner antenna FM Antenna Jack 2. Select Start All Programs FM Tuner Utility to start FM software.
  • Page 107 TOSHIBA strongly recommend the customer to enable the encryption function. ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. Bluetooth Stack for Windows by TOSHIBA (depends on the model...

  • Page 108: Product Support

    Bluetooth functionality. Product Support: The latest information regarding Operating System support, Language Support or available upgrades can be found on our web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.toshiba.com in the United States. Wireless communication switch You can enable or disable the Wireless LAN function, with the on/off switch.

  • Page 109: Lan

    Operating Basics The computer has built-in support for Fast Ethernet LAN or Giga bit Ehternet LAN (depends on the model you purchased). LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer's default settings could cause a malfunction in LAN operation.

  • Page 110: Cleaning The Computer

    Operating Basics Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer's LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub.
  • Page 111 Operating Basics ■ Never transport your computer with ExpressCards installed. This could cause damage to your computer and/or ExpressCard, resulting in product failure. ■ Use the carrying case when transporting the computer. ■ When carrying your computer, be sure to hold it securely so that it does not fall or hit anything.

  • Page 112: Chapter 5 The Keyboard

    The Keyboard Chapter 5 The Keyboard The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are five types of keys: typewriter keys, function keys, soft keys, ®...

  • Page 113: F1 ... F12 Function Keys

    The Keyboard F1 ... F12 function keys The function keys (not to be confused with Fn) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F12 are called function keys because they execute programmed functions when pressed.
  • Page 114 The Keyboard Power plan: Displays the power save modes and lets you change the power settings. Sleep: This hot key switches the system to Sleep Mode. Hibernate:This hot key switches the system to Hibernate mode. Output: Changes the active display device. Default resolution for simultaneous mode is set to 1024 ×...

  • Page 115: Windows® Special Keys

    TOSHIBA Zooming Utility (enlarge): Increases the icon size on the desktop or the font size within one of the supported application windows. Before using Fn + 1 and Fn + 2, you must install the TOSHIBA Zooming Utility. The Utility only supports the following application windows: Microsoft Internet Explorer, Microsoft Office, Windows Media Player, Adobe Reader and the icons on the desktop.

  • Page 116: Chapter 6 Power And Power-Up Modes

    Power and Power-Up Modes Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.

  • Page 117: Power Indicators

    Power and Power-Up Modes Power indicators As shown in the above table, the Battery Power indicators on the system indicator alert you to the computer’s operating capability and battery charge status. Battery indicator Check the Battery indicator to determine the status of the battery pack. The following indicator lights indicate the battery status: Flashing orange The battery charge is low.

  • Page 118: Battery Types

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not remove the battery pack while the computer is in Sleep Mode.

  • Page 119: Care And Use Of The Battery Pack

    The computer's RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.

  • Page 120: Safety Precautions

    Power and Power-Up Modes Safety precautions Mishandling of batteries can cause death, serious injury or property damage. Carefully observe the following advisories: Danger: Indicates an imminently hazardous situation, which could result in death or serious injury, if you do not follow instructions. Warning: Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions.
  • Page 121 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.

  • Page 122: Charging The Batteries

    Power and Power-Up Modes Note 1. Never remove the battery pack while the Wake-up on LAN function is enabled. Data will be lost. Before you remove a battery pack, disable the Wake-up on LAN function. 2. After the battery pack is charged, avoid leaving the AC adaptor connected and the computer turned off for more than a few hours at a time.

  • Page 123: Battery Charging Notice

    Power and Power-Up Modes Battery charging notice The battery may not charge right away under the following conditions: ■ The battery is extremely hot or cold. If the battery is extremely hot, it might not charge at all. To ensure the battery charges to its full capacity, charge the battery at room temperature of 10°...

  • Page 124: Maximizing Battery Operating Time

    Power and Power-Up Modes Maximizing battery operating time A battery’s usefulness depends on how long it can supply power on a single charge. How long the charge lasts in a battery depends on: ■ CPU processing speed (depends on the model you purchased) ■...

  • Page 125: Replacing The Battery Pack

    Power and Power-Up Modes 3. Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the Battery indicator flashes or there is some other warning to indicate a low battery, go to step 4.
  • Page 126 Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.

  • Page 127: Starting The Computer By Password

    Power and Power-Up Modes Starting the computer by password If you have already registered a password, there are two ways to start the computer: ■ Swipe your fingerprint on the sensor if you have already registered the fingerprint with the Fingerprint utility and enabled Fingerprint Power- on Security.

  • Page 128: Panel Power Off/On

    Power and Power-Up Modes Panel power off/on You can set up your computer so that power turns off automatically when you close the display panel. When you open the panel, power turns on in Sleep Mode or Hibernation Mode but not in boot mode. If the panel power off function is enabled and you use Shut down ®...

  • Page 129: Chapter 7 Hw Setup

    HW Setup Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for General, Password, Display, Boot Priority, Keyboard, LAN, and USB. Accessing HW Setup To run HW Setup, click , All Programs, TOSHIBA, Utilities, HWSetup.

  • Page 130: Boot Priority

    HW Setup User Password Lets you register a new password or un-register an existing password. Not Registered Un-registers an existing password Registered Register a new password by following the on screen instructions Owner String This blank field is used to display a message when the password field is displayed on startup.
  • Page 131 HW Setup Disabled Disables the Wake-up on Keyboard function (Default). USB Keyboard/Mouse/FDD Legacy Emulation Use this option to enable or disable Legacy USB support. If your operating system does not support USB, you can still use a USB mouse, keyboard, and FDD by setting the Legacy USB Support to enable.

  • Page 132: Chapter 8 Optional Devices

    Optional Devices Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory ■ ExpressCard ■ SD (Secure Digital)/SDHC (Secure Digital High Capacity)/MMC (Multi...

  • Page 133: Inserting An Expresscard

    Optional Devices Inserting an ExpressCard One ExpressCard connector is located on the left side of the computer. The computer's hot-install feature lets you install ExpressCard while the computer's power is on. To install an ExpressCard, follow the steps below. 1. Insert the ExpressCard. 2.

  • Page 134: Sd/Sdhc/Mmc/Memory Stick/Memory Stick Pro/Xd Memory Cards

    Optional Devices ExpressCard Removing the ExpressCard SD/SDHC/MMC/MEMORY STICK/MEMORY STICK PRO/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/SDHC/MMC/MEMORY STICK/MEMORY STICK PRO/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory.

  • Page 135: Installing A Memory Card

    Optional Devices Do not insert Memory Stick Duo/PRO Duo into the slot. Data may be lost or damaged if you use any card other than those supported. The card is designed so that it can be inserted only one way. Do not try to force the card into the slot.

  • Page 136: Removing A Memory Card

    Optional Devices Removing a memory card To remove a memory card, follow the steps below: 1. Click the Safely Remove Hardware icon on the Taskbar. 2. Select a device, then click the Stop button. A confirmation dialog may appear, depending on how the device is registered with the system; if so, confirm that you want to remove the device.

  • Page 137: Memory Expansion

    RAM. This section describes how to install and remove a memory module. ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. You can damage the computer and the module. Also, data will be lost.
  • Page 138 Optional Devices Memory Module Cover Removing the memory module cover 6. Lift one side of the insulator sheet and fit the module's connectors into the computer's connectors at about a 45 degree angle. Press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer.

  • Page 139: Removing A Memory Module

    Optional Devices Points to note about memory module error If you install a memory module that is not compatible with the computer, the Power indicator will flash (on for 0.5 seconds, off for 0.5 seconds) in the following ways: ■ If there is only an error in Slot A: repeatedly flashes orange twice, then blue.

  • Page 140: Additional Battery Pack

    Optional Devices Latches Removing the memory module 6. Seat the cover and secure it with screws and replace the battery pack. Additional battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery.

  • Page 141: Television

    Optional Devices ® ® When you turn on the power, the Windows Bootup screen (Windows Logo) appears on the display device. ® However, the Windows Desktop appears on a display device that you used last time to shut down your PC, if the display device exists when you turn on the power.

  • Page 142: Hdmi (Optional)

    Optional Devices HDMI (optional) A HDMI monitor can be connected to the HDMI out port on the computer. 1080p, 1080i, 720p, 576p and 480p signal formats can be supported. But actual signal format you can use depends on HDMI monitor. To connect monitor, follow the steps as detailed below: As the port operation of all HDMI (High-Definition Multimedia Interface) monitors has not been confirmed, some HDMI monitors may not function...

  • Page 143: I.link (Ieee1394)

    There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. 2. Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise.
  • Page 144 Optional Devices 5. If you connect/disconnect an i.LINK device to/from another i.LINK device that is currently exchanging data with the computer, data frames might be dropped. 6. Make sure data transfer has ended or turn off the computer, before you: a.

  • Page 145: Security Lock

    Optional Devices Security lock Security locks enable you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. The computer has a security lock slot on the left side. Attach one end of the cable to a desk and the other end to the security lock slot.

  • Page 146: Troubleshooting

    Troubleshooting Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 147: Analyzing The Problem

    Troubleshooting ■ Inspect all connecting cables for loose wires and all connectors for loose pins. ■ Check that your CD/DVD/CD-RW/HD DVD-R is correctly inserted. Make notes of your observations and keep them in a permanent error log. This will help you describe your problems to your dealer. If a problem recurs, the log will help you identify the problem faster.

  • Page 148: Hardware And System Checklist

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: ■...

  • Page 149: Overheating Power Down

    Troubleshooting Power When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including an intelligent power supply and a Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems.
  • Page 150 Troubleshooting Battery If you suspect a problem with the battery, check the Battery indicator. For information on indicator and battery operation refer to Chapter 6, Power and Power-Up Modes. Problem Procedure Battery doesn't power The battery may be discharged. Connect the AC the computer adaptor to charge the battery.
  • Page 151 Troubleshooting Disposing of PC and PC batteries ■ Discard this PC in accordance with applicable laws and regulations. For further information, contact your local government. ■ This PC contains rechargeable batteries. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them.

  • Page 152: Lcd Panel

    Troubleshooting After configuring the time and date for the Real Time Clock battery, we recommend that you turn the power status of your computer to "ON" so that the Real Time Clock battery is charged. Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, Keyboard.
  • Page 153 Troubleshooting DVD Super Multi drive (Supporting DVD±R DL) For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a Make sure the drive's drawer is securely closed. CD/DVD in the drive Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated.
  • Page 154 Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
  • Page 155 Troubleshooting Problem Procedure Some CD/DVDs run The software or hardware configuration may be correctly, but others do causing a problem. Make sure the hardware configuration matches your software’s needs. Check the CD/DVD’s documentation. Check the type of DVD/CD you are using. The drive supports: HD DVD-ROM: ■...
  • Page 156 Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA Do not use the mouse or keyboard during writing. Use only the software supplied with the computer for recording.
  • Page 157 Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA Do not use the mouse or keyboard during writing. Use only the software supplied with the computer for recording.
  • Page 158 Troubleshooting Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. TouchPad Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to Pad shaped as an hourglass, wait for it to return to its operation normal shape and try again to move it.

  • Page 159: Usb Mouse

    Troubleshooting USB mouse Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to mouse shaped as an hourglass, wait for it to resume its operation normal shape and try again to move it. Make sure the mouse is properly connected to the USB port.
  • Page 160 Troubleshooting USB Sleep and Charge function Problem Procedure I cannot use the "USB The setting of "USB Sleep and Charge function" Sleep and Charge may be [Disabled]. Change the setting to function". [Enabled] in the HW Setup. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply may be stopped for safety reasons.
  • Page 161 Troubleshooting Problem Procedure External devices Some external devices may not work when connected to the connected to a compatible port when the "USB compatible ports do not Sleep and Charge function" is [Enabled] in the work when connected to HW Setup. a compatible port.

  • Page 162: Sound System

    Troubleshooting Sound system Refer also to documentation for your audio devices. Problem Procedure No sound is heard Check the software volume settings. Make sure the headphone connection is secure. If problems persist, contact your dealer. Monitor Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation.
  • Page 163 Troubleshooting Problem Procedure Communication is cut The computer will automatically cut off off unexpectedly communication when connection with the carrier is not successful for a set time interval. Try lengthening this time interval. CONNECT display is Check the error control setting in your quickly replaced by communications application.

  • Page 164: Fingerprint Sensor

    If problems persist, contact your dealer. Fingerprint Pre-OS Please use TOSHIBA HW Setup to register the feature or Single Sign User Password if it was not registered. On feature cannot be...

  • Page 165: Toshiba Support

    Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.

  • Page 166: Specifications

    Specifications Appendix A Specifications This appendix summarizes the computer's technical specifications. Environmental Requirements Operating Non-operating Ambient temperature 5°C to 35°C -20°C to 60°C Relative humidity 20% to 80% 10% to 90% Altitude (from sea 0 to 3,000 meters -60 to 10,000 meters level) Power Requirements AC adaptor...
  • Page 167 Specifications Communication specifications Communication Data: Full duplex System Fax: Half duplex Communication Data protocol ITU-T-Rec V.21/V.22/V.22bis/V.32/ (Former CCITT) V.32bis/V.34/V.90/V.92 Bell 103/212A Fax: ITU-T-Rec V.17/V.29/V.27ter/V.21 ch2 (Former CCITT) Communication Data transmission and reception Speed 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Data reception only with V.90 28000/29333/30666/32000/33333/34666/36000/ 37333/38666/40000/41333/42666/44000/45333/ 46666/48000/49333/50666/52000/53333/54666/...

  • Page 168: Appendix B Display Controller And Modes

    Display Controller and Modes Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external monitors.

  • Page 169: Video Modes

    Display Controller and Modes Video Modes The computer supports video modes defined in the table below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on, resolution, number of colors and refresh rates.

  • Page 170: Card Specifications

    Wireless LAN Appendix C Wireless LAN Card Specifications Form Factor Mini PCI TypeIII ■ Compatibility IEEE 802.11 Standard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The "Wi-Fi CERTIFIED" logo is a certification mark of the Wi-Fi Alliance. ®...

  • Page 171: Radio Characteristics

    Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz and 5GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
  • Page 172 Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.

  • Page 173: Certification Agencies

    AC Power Cord and Connectors Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters...
  • Page 174 AC Power Cord and Connectors The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia and Europe. USA and Canada United Kingdom UL approved BS approved CSA approved Australia Europe AS approved Approved by the appropriate agency User’s Manual...

  • Page 175: Legal Footnotes

    Legal Footnotes Appendix E Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual.

  • Page 176: Battery Life

    Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 177: Copy Protection

    Legal Footnotes After going through many charge and discharge cycles, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is a normal phenomenon for all batteries. To purchase a new battery pack, see the accessories information that is shipped with your computer.
  • Page 178 Legal Footnotes Images All images are simulated for purposes of illustration. User’s Manual...

  • Page 179: If Your Computer Is Stolen

    What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.

  • Page 180: Toshiba Theft Registration

    If your computer is stolen TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. P300/P300D Series) Model number: (e.g. PSA50 YXT) Serial number: (e.g.
  • Page 181 Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AACS: advanced access content system AC: Alternating current ACPI: Advanced Configuration and Power Interface AMT: Intel Active Management Technology ASCII: American Standard Code for Information Interchange BIOS: basic input/output system bps: bits per second CD: compact disc...
  • Page 182 Glossary HDD: hard disk drive HD DVD: High Definition DVD HDCP: high-bandwidth digital content protection HDMI: high definition multimedia interface HDMI-CEC: high definition multimedia interface consumer electronics control IDE: integrated drive electronics IEEE: Institute of Electrical and Electronics Engineers IMSM: Intel Matrix Storage Manager I/O: input/output IRQ: interrupt request KB: kilobyte...
  • Page 183 Glossary AACS: A standard for copy protection that is used for HD DVD. It manages copy and output. adaptor: A device that provides a compatible connection between two units. For example, the computer's internal display adapter receives information from the software and translates it into images on the screen.
  • Page 184 Glossary Bluetooth: A short-range radio technology designed to simplify wireless communication among computers, communication devices and the Internet. board: A circuit board. An internal card containing electronic components, called chips, which perform a specific function or increase the capabilities of the system. boot disk: See system disk.
  • Page 185 Glossary CD-RW: A Compact Disc-ReWritable disc can be rewritten many times. See also CD-ROM. character: Any letter, number, punctuation mark, or symbol used by the computer. Also synonymous with byte. chassis: The frame containing the computer. chip: A small semiconductor containing computer logic and circuitry for processing, memory, input/output functions and controlling other chips.
  • Page 186 Glossary CPU: Central Processing Unit. The portion of the computer that interprets and executes instructions. CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen.
  • Page 187 Glossary documentation: The set of manuals and/or other instructions written for the users of a computer system or application. Computer system documentation typically includes procedural and tutorial information as well as system functions. double click: To press and release the pointing device's primary button rapidly twice without moving the pointing device.
  • Page 188 Glossary escape: 1) A code (ASCII code 27), signaling the computer that what follows are commands; used with peripheral devices such as printers and modems. 2) A means of aborting the task currently in progress. execute: To interpret and execute an instruction. fast infrared: An industry standard that enables cableless infrared serial data transfer at speeds of up to 4 Mbps.
  • Page 189 FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. i.LINK (IEEE1394): This port enables high-speed data transfer directly from external devices such as digital video cameras.
  • Page 190 Glossary instruction: Statements or commands that specify how to perform a particular task. interface: 1) Hardware and/or software components of a system used specifically to connect one system or device to another. 2) To physically connect one system or device to another to exchange information.
  • Page 191 Glossary Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent conducting material. The viewing- side coating is etched into character forming segments with leads that extend to the edge of the glass. Applying a voltage between the glass sheets.
  • Page 192 Glossary network: A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail. non-system disk: A disk for storing programs and data that cannot be used to start the computer.
  • Page 193 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver: A TOSHIBA utility that lets you set the parameters for various power-saving functions. program: A set of instructions a computer can execute that enables it to achieve a desired result.
  • Page 194 A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B computing device regulations. Random Access Memory (RAM): Volatile memory that can be written to as well as read.
  • Page 195 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. USB: Universal Serial Bus. This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.
  • Page 196 Glossary VGA: Video Graphics Array is an industry standard video adaptor that lets you run any popular software. volatile memory: Random access memory (RAM) that stores information as long as power is supplied to the computer. warm start: Restarting or resetting a computer without turning it off. ®...
  • Page 197 Index Index AC adaptor, 1-4 Equipment checklist, 1-1 additional, 1-17 Express card connecting, 3-2 inserting, 8-2 ASCII characters, 5-4 removing, 8-2 Expresscard, 8-1 Battery charging, 6-7 Floppy disk extending battery life, 6-9 using, 4-12 indicator, 6-1 Fn + Esc (sound mute), 5-2 location, 2-5 Fn + F1 (instant security), 5-2 Monitoring capacity, 6-8...
  • Page 198 Pointing device, 9-13 properties menu, 4-30 Power, 9-4 region selection, 4-30 Real Time Clock, 9-6 Monitor, external, 1-9, 8-9 Self test, 9-3 Sound system, 9-17 Support from TOSHIBA, Ports, 1-9 9-20 external monitor, 1-9 System start-up, 9-3 USB, 1-9 USB, 9-14 Power...
  • Page 199 5-2 ScrLock, 5-2 Sound System, 1-10 Headphone (S/P DIF) jack, 1-10 microphone jack, 1-10 mute hot keys, 5-2 TOSHIBA ConfigFree, 1-16 TOSHIBA Theft Registration, F-2 Touch Pad, 1-9 location, 2-6 using, 4-1 USB, 1-9 Video modes, B-2 Video RAM, 1-4...

This manual is also suitable for:

P300dP300 seriesP300d series

Table of Contents