External Unit - Panasonic SC-HC3 Operating Instructions Manual

• Charging the iPod
• iPod will start recharging regardless of whether this unit is in ON or
Standby condition.
• "'POD
*"
will be shown on the main unit's display during iPod charging
in main unit standby mode.
• Check iPod to see if the battery is fully recharged.
• I!
you are not using iPod for an extended period of time after recharging
has completed, disconnect it from main unit, as the battery will be
depleted naturally. (Once fully recharged, additional recharging will not
occur.)
Push
[~]
)
~
External unit
~~~~~~~~~~~~~~~~~~~~~~
• Enjoying audio from iPod
IICID",
I
• Inserting the iPod
(j)
Press [iPod
~,
OPEN/CLOSEJ to open the sliding door.
a>
Push
[~J
to open the docking switch.
® Insert your iPod into the dock.
crl Push back the docking switch.
• Recharging starts when the iPod dock is properly locked.
Name Memory size
iPod touch 2nd generation 8 GB, 16 GB, 32 GB
iPod nano 4th generation (video) 8 GB, 16 GB
iPod classic 120 GB
iPod touch 1st generation 8 GB, 16 GB, 32 GB
iPod nano 3rd generation (video) 4 GB, 8GB
iPod classic 80 GB, 160 GB
iPod nano 2nd generation (aluminum) 2 GB, 4 GB, 8 GB
iPod 5th generation (video) 60 GB, 80 GB
iPod 5th generation (video) 30GB
iPod nano 1st generation 1 GB, 2 GB, 4 GB
iPod 4th generation (color display) 40 GB, 60 GB
iPod 4th generation (color display) 20 GB, 30GB
iPod 4th generation 40GB
iPod 4th generation 20GB
iPod mini 4 GB, 6 GB
• Compatible iPod
• Compatibility depends on the software version of your iPod.
iPod
(not included)
Dock adapter
(not included)
Docking switch
a>
Adjust the docking switch and insert the suitable dock adapter for
your iPod.
® Press [iPod
~,
OPEN/CLOSEJ again to close the sliding door.
Keep fingers away from the sliding door when it is closing to avoid
possible minor injuries.
• It is recommended to use the dock adapter from Apple.
• Be sure to push
[~J
to open and adjust the docking switch when
removing the iPod. Push back the docking switch after iPod being
removed.
Changing the main unit and
remote control mode
The remote control and main unit are factory-set to "REMOTE 1" mode.
I!
you find the remote control unintentionally also controls other equipment,
you can switch to operate in "REMOTE 2" mode.
• Playing the iPod
Preparation:
• Reduce the volume of the main unit to minimum before connecting/
disconnecting the iPod.
• Confirm the iPod connection. (- above)
(j)
Press [iPod
~JlI]
to play the iPod.
@
Adjust the volume of the main unit.
To
switch to "REMOTE
2"
mode
I
AUX
I
(j)
Press [AUX] to enter AUX mode.
@
(While pressing [AUXJ on the main unit)
Press and hold [2] until "REMOTE 2" appears on the main unit
display.
a>
Press and hold [OKJ followed by [2] for at least 2 seconds.
The main unit and remote control are now set to operate in "REMOTE 2"
mode.
o
LO
C\l
o
x
b
rr:
I
To Remote control Main unit
display iPod menu/retum Press [iPod MENU].
-
previous menu
(During play/pause)
select contents from iPod
Press
[A,T,
ALBUMJ
-
menu
followed by [OK].
(During play/pause)
pause track
Press [iPod
~JlI]
Press [iPod
~JlIJ
or
[II]. or[~.
skip a track
Press
[~/~J
or Press
[~/~J
or
(During play/pause) [~~]. [~~].
search the current track Press and hold Press and hold
(During play/pause)
[~/~]or
[I+l/~]
or
[~~]. [~~].
To
return to "REMOTE
1"
mode
Perform steps 1 to 3 but use [1J instead of [2] for steps 2 and 3.
("REMOTE 1" appears on the main unit during step 2.)
The remote control cannot work with the main unit if their modes are
different.
"REMOTE 1" or "REMOTE 2" appears on the main unit when you operate
the remote control.' -
• I! "REMOTE 1" appears (The main unit is in "REMOTE 1" mode.)
Press and hold [OK] followed by [1J on the remote control for at least 2
seconds.
I!
"REMOTE 2" appears (The main unit is in "REMOTE 2" mode.)
Press and hold [OKJ followed by [2] on the remote control for at least 2
seconds.