Advertisement
Lightweight construction.
Anyone who wants to go beyond
the horizon has to work on their
performance – and concentrate
on strength. The way to achieve
this is to make sacrifices. But only
with regard to weight. The new
911 GT2 RS is 70 kg lighter than
the 911 GT2. Its weight-to-power
ratio: just 2.21 kg/hp. For excel-
lent performance. And with rela-
tively moderate fuel consumption.
This is achieved thanks to a whole
series of modifications. In parti-
cular, the use of materials that
are more typically found in motor-
sport. The front lid, the side air
intakes on the charge air cooler,
the slats in front of the front lid,
the rear middle section, the rear
spoiler lip and the rear wing are
all constructed from carbon. As
are the lightweight bucket seats
and door sills with the 'RS' logo.
The front mud flaps are also
available in carbon as an option.
|
8
Instead of the usual steel, the
diagonal struts on the rear axle
are made from aluminium. As are
the fixed calipers of the PCCB on
the front and rear axle. The engine
cover, rear window and rear side
windows are made from a synthetic
material. In addition to this, the
new 911 GT2 RS has lightweight
door panels with side pads and
door pulls. Throughout the body,
much of the soundproofing has
been removed and the interior
soundproofing has also been
reduced.
The lightweight single mass
flywheel makes the engine even
more responsive. Weight has
even been reduced in the body
structure: there are no fittings for
a roof transport system and there
are no reinforcements for fasten-
ing the seat belts in the floor.
The battery in the new 911 GT2 RS
is also lighter. A lithium ion battery
which provides an additional weight
saving of over 10 kg compared to
the conventional standard battery
is available as an option. The
lithium ion battery is inserted in
the vehicle and can easily be
replaced by the standard battery
for use on the racetrack.
In addition, you can opt to do
without the CDR-30 audio system,
the air conditioning and the
Clubsport package. To achieve an
even lower power-to-weight ratio.
Design.
Even the appearance of the new
911 GT2 RS leaves no room for
doubt: it is more powerful than
before.
Power is demanding. So, with
regard to aerodynamics, the design
has been aimed at achieving the
best possible cooling and the
greatest possible downforce. The
large air inlets ensure that the air
is directed straight to the central
radiator and the front brakes. The
carbon air outlet in front of the
front lid guides the air flowing
through the central radiator up
over the vehicle, thus increasing
the downforce on the front axle.
Immediately noticeable are the
front wings which are 26 mm
wider, enabling a wider toe angle
and the use of wider tyres. The
19-inch GT2 RS wheels have a
white gold metallic finish.
A further striking feature is the
black 'GT2 RS' logo on the side.
The rear with a carbon middle
section makes an impression.
And the carbon lip on the fixed
rear wing sits 10 mm higher.
For extreme driving stability.
For greater efficiency and more
engine power, as the speed in-
creases, additional air is pressed
into the intake channel through
the air inlet channels in the wing
supports. This ram air system
builds up the air in front of the
turbochargers. This relieves the
turbochargers, thus lowering
exhaust gas back pressure and
increasing engine power.
To sum up: a drag coefficient
value of only 0.34. Along with
increased downforce on the front
and rear axles. For better road
holding, greater stability and
excellent handling. In short, a
design that fulfils its purpose:
to create awe.
Hide quick links:
Advertisement
