Overview Error Displays; Functional Testing Cycle - Electrolux COMPACT MIDI + EDW 500 Service Manual

Functional testing cycle

This is an abbreviated washing programme (50 min) which allows the Service Engineer to test all the
functions that comprise a traditional washing cycle; in effect, the system simulates a normal cycle.
Selecting the cycle
To activate the function:
1. Press and hold down button S1.
2. Turn the knob anti-clockwise till Position 5.
- the LEDs LD0 and LD1 flash.
- release button S1.
3. Turn the knob till Position 3
- press button S1.
- the programme starts: the programme behaves as in
a normal cycle; the PAUSE and CANCEL options are
accessible.
Exiting Service and User modes
To exit these modes, turn the knob to OFF position and switch the appliance off or wait 60 seconds:
the LEDs light up and the appliance returns to selection mode.
Spares Operation - R.Kurzke 02/05
- 19 -
599 521 951 EN