Service Menu; Service Functions; Service Mode - Electrolux COMPACT MIDI + EDW 500 Service Manual

Dishwasher compact midi
Table of Contents

Advertisement

15. SERVICE MODE

With this procedure it is possible to access the Service Diagnostics System. Once this mode is
accessed, it is possible to:
-
read and cancel the alarms
-
control the operation of the various components of the appliance
-
start the Service diagnostics mode
Reading the alarms and activating the individual components
To activate the function:
1) Press and hold down the button S1.
2) Turn the knob anti-clockwise till Position 5:
- The LEDs LD0 and LD1 flash.
- Release button S1.
- Press button S1.
- the first memorised alarm is displayed: the End of
cycle LED flashes and pauses: for the decodification,
please refer to table of alarm codes.
4) Press again button S1 to display the second alarm.
5) Pressing button S1 again, the third alarm is displayed.
6) Pressing button S1 for the fourth time, the appliance
actuators are activated:
- 4th actuation: regeneration solenoid
- 5th actuation: drain pump
- 6th actuation: water fill solenoid and washing pump
(water up to level)
- 7th actuation: heating (only if water up to level)
- 8th actuation: washing pump
- 9th actuation: detergent/rinse-aid dispenser
- 10th actuation:
- 11th actuation: it starts again from the first alarm
All positions can be repeated pushing button S1 sequentially.
The components are powered with door closed.
If button S1 is not pressed for 60 seconds, the diagnostics terminate automatically.
Cancelling alarm codes from memory / test of LEDs
It is good practise to cancel the alarm memorised:
-
after reading the alarm code, to check whether it is repeated
during the diagnostics test.
-
after repairing the appliance, to check whether it is repeated
during the testing cycle.
To activate the function:
1) Press and hold down button S1.
2) Turn the knob anti-clockwise till Position 5:
- the LEDs LD0 and LD1 flash.
- release button S1.
3) Turn the knob till Position 4.
- press button S1.
- all LEDs start to flash for 30 seconds.
Spares Operation - R.Kurzke 02/05
- 18 -
599 521 951
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Edw 500

Table of Contents