Setting The Area Code; Setting Caller Id On Call Waiting (Cidcw) - Radio Shack 43-140 Owner's Manual

The.Basics
Setting.the.Area.Code
If in your local calling area you can make a local call by dialing
only seven digits (instead of ten), you can program your local
area code in your phone. Calls that come from within your area
code will show only the seven-digit phone number; calls from
outside your area code will show all ten digits. To enter an area
code, follow the steps below:
1. Press MENu/SET on the base.
2. Press SELECT/
and then press MENu/SET.
3. Press the number keypad 0-9 to enter a three-digit area code.
4. If you press MENu/SET, the stored number will be transferred
to the cordless handset. If the transfer is successful, you will
hear a confirmation tone from the base and cordless handset.
otherwise, AREA CoDE SETTING FAILED! appears on the
display and an error tone sounds. You will have to start over
with the procedure you are performing.
If the area code has already been stored in memory,
NOTE the stored area code will be displayed. To change it,
use
area code.
Setting.Caller.ID.on.Call.Waiting.(CIDCW)
Caller ID on Call Waiting (CIDCW) displays the name and number
of an incoming call while you are on the line.
1. Press MENu/SET on the base.
2. Press SELECT/
then press MENu/SET.
3. Press SELECT/
press MENu/SET. You will hear a confirmation tone.
UC044ZH_43-140_OM5.indd 26
to move the pointer to select AREA CoDE,
(delete) and the number keys to enter the new
to move the pointer to select CIDCW, and
or SELECT/

to select ON or OFF, and then
12/18/2006 3:33:57 PM