Press the opposite end of the capacitor pack in the holder.
b.
Install the access panel (on page 19).
11.
Do one of the following:
12.
Slide the server into the rack.
o
Install the server into the rack
o
Connect each power cord to the server.
13.
Connect each power cord to the power source.
14.
Power up the server (on page 16).
15.
Optical drive option
To install the component:
Power down the server (on page 16).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 16).
o
Remove the server from the rack (on page 17).
o
("Installing the server into the
rack" on page 27).
Hardware options installation 40