HP ProLiant DL320e Gen8 User Manual page 36

Low-profile controller connection
o
Secure the excess length of the Mini-SAS cable in the cable clip.
9.
Connect the rest of the drive cables required in this drive configuration. For more information, see
10.
"Storage cabling (on page 54)."
Install the access panel (on page 19).
11.
Do one of the following:
12.
Slide the server into the rack.
o
Install the server into the rack
o
Install the drives ("Drive
13.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
Connect each power cord to the server.
14.
Connect each power cord to the power source.
15.
("Installing the server into the
options" on page 31).
rack" on page 27).
Hardware options installation 36