Sony DPP-FP97 Operating Instructions Manual page 72

~ Connect the cable correctly.
Connecting with a digital camera or other external device
S''''m .
c..
~;;..··
~¥"" ". ,:~
The PictBridge • Is the digital camera
mark does not connected correctly?
appear on the LCD • Is the
c9
(on/standby) button ~ Turn on the printer using the
c9
(on/
screen of the turned on? standby) button.
digital camera.
I - - - - - - - - - - - - - + - - - - - - - - - - - - - - - - - - - - l
• Does your digital camera
~
Refer to the manual supplied with your
support PictBridge? camera, or consult the manufacturer.
You connect and
disconnect the
USB cable, but
nothing happens.
You cannot stop
printing even if
you pressed
CANCEL.
You cannot make
index printing.
• Is "Connecting" displayed
on the printer LCD screen?
• Is the USB setting of your
camera in PictBridge mode?
• Is the message "Could not
create printing data for some
images." displayed?
~
The message is not displayed while the
printer is in the Edit, CreativePrint, or
other menu modes. Exit the menu and
then connect the cable again.
~
Disconnect the digital camera and the
printer and then connect them again. Or
turn off and then on the printer and the
digital camera.
~
Set the USB setting of your camera to the
PictBridge mode.
~ The printer has developed an over-current
error. Unplug the AC power cord of the
printer, plug it in again, and then press the
c9
(on/standby) button to recover from the
error.
~ The next print from the one currently
printed will be canceled.
~
Depending on the digital camera you use,
you cannot cancel printing from the
printer. Operate the digital camera to stop
printing. Refer to the operating
instructions of the digital camera.
~ The printer cannot print index print of the
DPOF printing. To make index printing,
insert the memory card directly or use an
external device (..........page 16,48).