Sony DPP-FP97 Operating Instructions Manual page 50

Printing from a S'uetooth-comp'iant
device
Printing from a Bluetooth-
compliant device
By connecting the Sony DPPA-BTl Bluetooth
USB adaptor (sold separately) to the PictBridge/
EXT INTERFACE connector of your printer, you
can print an image from a Bluetooth-compliant
mobile phone, digital camera, or other device.
--
• Do not use the DPPA-BTl outside the area you
purchased it. Depending on the area, the use of the
adaptor may violate the local radio wave
regulations and may be subject to penalty.
• In some regions, the Sony DPPA-BTI Bluetooth
USB adaptor is not sold.
The DPP-FP97 supports the following profiles:
• BIP (Basic Imaging Profile)
Image Push Responder
• OPP (Object Push Profile)
Object Push Server
For the profiles that your Bluetooth device
supports, please refer to its manual.
What is a "Profile"?
A profile consists of the standards that enable
Bluetooth wireless communication. There are
several profiles available, depending on the purposes
and product to be used. To make Bluetooth
communication possible, the devices used in the
communicated should support the same profile.
Compatible image file formats that can
be printed
See page 82.
Maximum number of pixels that can be
handled
See page 82.
• If the file size of an image exceeds 5 MB, the
image cannot be transmitted or the
thumbnail of the image will be transmitted.
50
GB
Before you start transferring an image or
printing, you need the following preparations:
1
Connect the printer to the AC power
source.(page 12)
2
Press the
c9
(on/standby) button to
turn on the printer.
3
Insert the Bluetooth adaptor into the
PictBridge/EXT INTERFACE
connector of your printer.
The Bluetooth printing mode window is
displayed. On upper left on the screen,
~
Print Mode
is displayed.
-
I f any device, other than the Bluetooth adaptor,
such as a memory card, camera, PC, or other
USB memory or a USB cable is connected to
any of the memory card slots, the PictBridge/
EXT INTERFACE connector, or USB
connecter of your printer, disconnect it from the
printer and then connect the Bluetooth adaptor.
Print from the Bluetooth-compliant
mobile phone, or other device.
For printing procedures, refer to the manual of
your Bluetooth device.