Sony DPP-FP97 Operating Instructions Manual page 22

1
From the " Edit menu (page 18),
press <1/1> to select
on
(Adjust) and
then press ENTER.
The Adjust menu is displayed.
2
Press!::J'l to select the desired
adjustment tool and press ENTER.
The adjustment screen of the selected tool
appears.
When "Brightness" is selected.
1
From the
, >
Edit menu (page 18),
press <1/1> to select
D
(Filter) and
then press ENTER.
The Filter menu is displayed.
SILKYPIX~
The "Painting" filter of the printer
is
uses the
technology of Ichikawa Soft Laboratory.
Single Color
Painting
Cross Filter
Partial Color
...
to select item
ENTER
• Cross Filter: Adds a cross, starburst
effect to the light source to print an
image with a sparkling impression.
• Partial Color: Makes the
surroundings of the subject
monochrome to emphasize the subject
in the center.
• Sepia: Changes the image to look like
an old photograph with faded colors.
• Monochrome: Changes the image
into a black and white picture.
2
Press !::J'l to select the filter you
want to add to the image.
• No Filter: No special filter is used on
the image (default setting).
• Single Color: Changes all the colors
except for the one specified color into
gray scale.
• Painting: Makes the image look like a
painted picture.
Press <J/I> to adjust an image while
checking the level.
The image before adjustment is displayed
on the left half of the screen, and the
adjusted image is displayed on the right.
• Brightness: Press I> to brighten the
picture or <J to darken it.
• Tint: Press I> to make the picture
greenish or <J to make it reddish.
• Saturation: Press I> to deepen the
colors or <J to lighten them.
• Sharpness: Press I> to sharpen the
outlines or <J to soften them.
3
Press ENTER.
The adjustment takes effect.
4
Press PRINT.