1. Manuals
  2. Brands
  3. Sony Manuals
  4. Printer
  5. DPP-FP95
  6. Service manual

Sony DPP-FP95 Service Manual

Digital photo printer
Hide thumbs Also See for DPP-FP95:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
Ver. 1.3 2008. 10
Revision History
Revision History
Revised-3
Replace the previously issued
SERVICE MANUAL 9-852-294-13
with this Manual.
Link
Link
SPECIFICATIONS
REPAIR PARTS LIST
DPP-FP95
9-852-294-14
DPP-FP95
TROUBLESHOOTING
ADJUSTMENT AND CHECK
DIGITAL PHOTO PRINTER
Sony EMCS Co.
US Model
Canadian Model
AEP Model
UK Model
East European Model
Russian Model
E Model
Chinese Model
Korea Model
Tourist Model
Published by Kohda TEC
2008J0200-1
©2008.10

Advertisement

Table of Contents
loading

Related Manuals for Sony DPP-FP95

Summary of Contents for Sony DPP-FP95

  • Page 1 Replace the previously issued Chinese Model SERVICE MANUAL 9-852-294-13 with this Manual. Korea Model Tourist Model Link Link SPECIFICATIONS TROUBLESHOOTING REPAIR PARTS LIST ADJUSTMENT AND CHECK DIGITAL PHOTO PRINTER 2008J0200-1 DPP-FP95 ©2008.10 Sony EMCS Co. 9-852-294-14 Published by Kohda TEC...
  • Page 2 *2: When printing a photo (Approx.4.37 MB file Ver.1.0 and Picture Motion Browser Ver.3.0) Compatible image file formats size) taken by a Sony digital still camera • Operating Instructions JPEG: DCF 2.0 compatible, Exif 2.21 containing effective picture elements of •...

  • Page 3: Table Of Contents

    MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

  • Page 4: Repair Parts List

    NOTE NOTE 1. REPAIR PARTS LIST EXPLODED VIEWS EXPLODED VIEWS Link Link ACCESSORIES ACCESSORIES PRINTER SECTION PRINTER SECTION LID UPPER SECTION LID UPPER SECTION DPP-FP95...
  • Page 5 Ne les remplacer que par une pièce portant le numéro spécifié. • Abbreviation : Chinese model CND : Canadian model : East European model : Tourist model : Korea model RUS : Russian model TW : Taiwan model DPP-FP95...

  • Page 6: Exploded Views

    3-080-205-31 SCREW, TAPPING, P2 (WHITE) 3-285-769-01 BASE, REFLECTION 3-945-884-11 SCREW (2X6) (BLACK) 2-899-600-01 CUSHION (LCD) 3-113-819-01 FOOT (LCD), RUBBER (WHITE) 3-296-798-01 SHEET (LCD), ADHESIVE 3-113-819-11 FOOT (LCD), RUBBER (BLACK) 3-296-799-01 PLATE (HINGE) 3-288-912-01 CUSHION (HANDLE) (WHITE) 3-288-912-11 CUSHION (HANDLE) (BLACK) DPP-FP95...
  • Page 7 3-093-330-11 LOCK (MEDIA), DOOR (BLACK) 0 75 2-899-607-01 LID (MEDIA) (WHITE) 0 75 7-621-772-18 SCREW +B 2X4 2-899-607-21 LID (MEDIA) (BLACK) 3-296-801-01 PLATE (CARD) 3-296-800-01 PLATE (HDMI) 3-288-911-01 FOOT, RUBBER (WHITE) 4-216-272-01 SCREW (M2), + 3-288-911-11 FOOT, RUBBER (BLACK) DPP-FP95...
  • Page 8 3-285-423-51 INSTRUCTION (READ THIS FIRST) (TRADITIONAL CHINESE) (TW, JE) 3-285-422-11 INSTRUCTION (READ THIS FIRST) (ENGLISH) 3-285-423-61 INSTRUCTION (READ THIS FIRST) (EXCEPT CH, KR) (SIMPLIFIED CHINESE) (CH) 3-285-422-21 INSTRUCTION (READ THIS FIRST) (FRANCH) (CND, AEP) • Refer to page 1-1 for mark 0. DPP-FP95...
  • Page 9 Remove case (upper) in the direction of arrow (c). METHOD OF INSTALLING THERMAL PRINTER thermal printer eject lever opening case(lower) When installing thermal printer, incline thermal printer and pass the eject lever through the opening of case(lower), and set it like arrow. DPP-FP95 1-5E...

  • Page 10: Troubleshooting

    2. Whether abnormality is found in the mechanism deck printing cannot be made. Printed image is abnormal. 1. Prints with Mechanic Test of the service mode and confirms it 2. MAI board:CN208, IC204, and the surrounding circuit 3. Whether abnormality is found in the mechanism deck DPP-FP95...

  • Page 11: Mechanical Troubleshooting

    Remedy: • Remove the thermal printer from the lower cabinet and remove the paper. • When the thermal printer is abnormal, replace the thermal printer. • Check the print cartridge. (Deformation, damage, slack in ribbon, etc. of print cartridge) DPP-FP95...
  • Page 12 • Abnormal thermal head Remedy: • Check if FFC is correctly connected. • Replace the MAI board. • Replace the thermal printer. Trouble: Faint area appears on the printing side. Cause: Abnormal thermal printer Remedy: Replace the thermal printer. DPP-FP95 2-3E...

  • Page 13: Adjustment And Check

    Refer to page 3-5 “Check and adjustment upon completion of version upgrade” 3-3-6 About the error indication Optional 3-3-7 Mechanical operation check Optional * If destination is changed after version upgrade is completed, execute both items of destination change and LCD contrast adjustment (VCOM). DPP-FP95...

  • Page 14: Service Mode

    Connection procedure: Insert one power cord plug into the AC adapter (AC-S2422) supplied with the DPP-FP95 (hereafter, referred to as this unit) and insert the other power cord plug into the receptacle. Insert the DC plug of the supplied AC adapter into the DC-IN terminal of this unit.

  • Page 15: Adjustment

    MAI board, do not use it. Or in case that the test pattern (17 step) cannot be printed, use the test pattern that is printed by using the normally-working printer (DPP-FP95). Adjustment: Start the service mode. (Refer to Section 3-1-1.) Confirm the value written in the label on the HEAD of a thermal printer.
  • Page 16 3 is not saved if the [CANCEL] button is pressed. Quit the service mode. (Refer to Section 3-1-1.) 14. Turn off the power and disconnect the power cord from the receptacle. DPP-FP95...

  • Page 17: Check

    2) Check that the destination is not changed. (Destination is Quit the service mode. (Refer to Section 3-1-1.) displayed by XX of “DPP-FP95 (XX)” on the topmost line of the service mode screen.) 3) If destination is changed after version upgrade is completed, 3-3-2.
  • Page 18 Pull out the xD-Picture card, and insert the CF card that is prepared separately, and confirm the image of CF.jpg is displayed. Even if the button is not pushed, it is judged that the card is inserted. Insert all of the one card, and confirm it. DPP-FP95...
  • Page 19 It is possible to make this unit work by setting the service mode as SINK jig for the HDMI CEC check. Prepare this machine "B" (DPP-FP95 or DPP-FP85 other than the service set) for the HDMI CEC check, set the SINK jig by the following procedures, and check HDMI CEC when there is no monitor for CEC.
  • Page 20 "CEC/Freq Test" is selected with the DIRECTION buttons (f,F), and the [ENTER] button is pushed. "NG" is displayed at the right of "CEC/Freq Test" of the service mode start screen. End the service mode. (Refer to clause 3-1-1. ) DPP-FP95...
  • Page 21 Head position Cartridge for L size is inserted. Cleaning: Cartridge for cleaning is inserted. Unknown: Unknown Tray: Tray type Post: Tray for postcard size is inserted. Unknown: Unknown Tray for L size is inserted. None; Tray is not installed. DPP-FP95...
  • Page 22 The paper feed motor moves in the paper eject direction when this button is pressed. The speed changes every time this button is pressed. (Low speed L t Middle speed M t High speed H t Stop Stp) DPP-FP95 3-10E...
  • Page 23 Revised-1 S.M. Correction: Page 3-1, Page 3-4 Page 3-5, Page 3-7 Page 3-9, Page 3-10E • Change of ADJUSTMENT AND CHECK 2008.08 Revised-2 S.M. Correction: Page 3-4 • Change of CHECKING SUPPLIED 2008.10 Revised-3 ACCESSORIES. S.M. Correction: Page 1-4 DPP-FP95...

Table of Contents