Sony DPP-FP97 Operating Instructions Manual page 69

'S}!~pto:,
The picture quality
and colors of the
image previewed
on the screen
differs from those
printed.
The printed image
differs when an
image is printed
directly from the
memory card, the
internal memory,
and an external
device connected
to the printer and
when it is printed
via a PC.
The date cannot be
printed.
The date is printed
unintentionally.
The image cannot
be printed fully in
the print range.
Borders remains.
• Is "Date Print" set to "Date"
or "DatefTime"?
• Does the image support
DCF?
• Is "Date Print" set to "Off'?
• Was the date saved with the
image when it was shot with
the digital camera?
• Did you select "Pattern I" or
"Pattern 2" for "Borders" in
the Print setup menu?
• Is the aspect ratio of the
image correct?
~ Because of differences in the display
method or profiles of a LCD screen,
please regard the image being displayed
on the display as just a reference. To
adjust picture quality, do either of the
following:
- MENU button - Print setup - Color
Setting (~page 42)
- MENU button -Edit-Adjust
(~page22)
~ Because of the differences in the printer's
internal processing and PC software
processing, the printed images will be
different.
~ Press MENU button, and set "Date Print"
in the Print setup menu to "Date" or
"DatefTime."
(~page
40)
~ The "Date Print" function of this unit
supports an image that is compatible with
the DCF standards.
~ Press MENU button, and set "Date Print"
in the Print setup menu to "Off."
(~page40)
~
When the date was saved with the image,
you cannot make a print without a date.
~ Press MENU button, and set "Borderless"
by selecting Print setup - Borders.
(~page41)
~ Depending on the type of digital camera
used, the aspect ratio of the recorded
image differs, so the image may not be
printed covering the entire printable area.
Continued
69
GB