Palm IIIe Handbook page 17

Locating back panel components
IR port
Stylus
Stylus
IR port
Reset button
Contrast
control
Battery door
Serial (COM)
port door
Chapter 1
Slides in and out of the slot in the back panel of
the organizer. To use the stylus, remove it from
the slot and hold it as you would a pen or pencil.
Uses infrared technology to transmit data to and
receive data from other Palm Computing
connected organizers. See "Beaming
information" in Chapter 5 for more information.
Under normal use, you should not have to use the
reset button. See Appendix A for information
about when and how to use the reset button.
Adjusts the appearance of the screen for the
clearest screen display. Depending on the
lighting conditions or temperature of the
environment where you use your organizer, you
may need to adjust the contrast control setting.
Covers the batteries that power your organizer.
Covers the connector that connects your
organizer to the cradle, which in turn connects to
the back of your computer. This allows you to
update the information between your organizer
and computer using HotSync technology.
Reset
button
Contrast
control
Battery
door
Serial (COM)
port door
Page 17
®