Creating A Login Script - Palm IIIe Handbook

section of the IP address.
Note: Each section must be a number from 0 to 255.
3. Tap and enter the remaining sections of the IP address.
4. Tap OK.

Creating a login script

A login script is a series of commands, similar to an autoexec.bat file,
that automates logging into your ISP. You can create login script files
by selecting commands from the Command pick list in the Login
Script dialog. Some commands from the Command pick list, such as
Send, require you to supply additional information. Those commands
have a parameter field so that you can add the necessary data.
Note: You can also use non-ASCII and literal characters in your
login script. See Appendix D for more information.
To create a login script:
1. Tap Script.
2. Tap the End pick list.
3. Tap the command you want from the Command list. If the
command requires additional information, a field appears to the
right of it for you to enter the information. The following
commands are available:
Wait For
Send
Chapter 7
Tap here
Tells your organizer to wait for specific
characters from the TCP/IP server before
executing the next command.
Transmits specific characters to the TCP/
IP server to which you are connecting.
Page 169