Table of Contents
Advertisement
3 1 5 M H Z R A D I O R E C E I V E R P R O G R A M M I N G
IMPORTANT: Hand Held Remote NOT provided.
Learn
Button
Mini 3 Button
Part #
370LM
NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of
this receiver and/or transmitter are prohibited, except for changing the code setting or replacing
the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
NOTE: Receiver wiring on page 11.
Disconnect the second receiver when
using a master/second setup.
Programming Radio Receiver:
1. Press and release the
"Learn
The learn indicator light will glow steadily for 30 seconds.
2. Within 30 seconds, press and hold the button on the
hand-held remote. The operator will now operate when the
push button on the remote control is pressed.
Repeat Steps 1 and 2 for each remote control that will be used.
Erase ALL Remote Control Codes:
Press and hold the
"Learn
" button on the receiver panel until the indicator light turns off
(about 6 seconds). All previous codes are now erased. Reprogram each remote you wish
to use.
Optional 315 MHz Hand Held Remotes
Part #
371LM
Part #
372LM
Part #
373LM
Part #
374LM
" button on the receiver.
Part #
CPT13
Part #
CPT23
Part #
CPT33
Part #
CPT43
29
Mini 3 Button
Part #
CPTK33
Mini 3 Button with
HID Prox, Sensor
Part #
CPTK33PH
Hide quick links:
Advertisement
Table of Contents
