Vdc Photo Beam Wiring - Optional - Chamberlain THE ROBO SLIDE Instruction Manual

" O P T I O N A L " 1 2 V D C P H O T O B E A M W I R I N G
DC
POWER INPUT
(Part # A OMRON 12V)
(Failsafe)
Photo Beam (Safety) 12 VDC
It is best to use 12 VDC Failsafe Photo Beam Sensors for this Safety Option
Failsafe Photo Beam: If a failsafe photo beam is not working or loses power or photo beam is blocked, then the
photo beam will stop all gate operation.
Contact your local dealer
for more information.
®
® ROBO SURGE SUPPRESSOR
DC ACCESS SYSTEMS INC ACCESS SYSTEMS INC ACCESS SYSTEMS INC
– – 7 8
1 4 5 6
–
SAFETY SAFETY EXIT EXIT FIRE DEPT FIRE DEPT STRIKE OPEN STRIKE OPEN
25 VDC LOOP LOOP LOOP LOOP KEY SWITCH KEY SWITCH PUSH BUTTON PUSH BUTTON
Orange White
4
1
Power
17
WARNING
To prevent SERIOUS INJURY or DEATH from a moving gate:
• Locate entrapment protection devices to protect in BOTH the
open and close gate cycles.
• Locate entrapment protection devices to protect between
moving gate and RIGID objects, such as posts or walls.
P/N Q412 P/N Q412
P A T ENT PENDING P A T ENT PENDING
9 10 11 12 13
+
– + +
– –
CLASS 2 CLASS 2
SUPPL Y SUPPL Y
RADIO RADIO
RECEIVER RECEIVER
Blue Brown
11 13
NOTE:
If photo beam is blocked the gate will stop
and reopen. The gate will remain open until the
obstruction is cleared.