Installation; Getting Started; Mounting Operator; Chain Installation - Chamberlain THE ROBO SLIDE Instruction Manual

This gate operator is designed for single home application, or for limited commercial applications. An example of a commercial
application would be a factory facility with limited cycles per day, using a plug in transformer or solar panel.
UL approved underground conduit(s).
High voltage power wires run in
separate conduit.
Minimum space between gate and output sprocket must be 4". After you position the gate operator , bolt-down the operator to the concrete bed.
Make certain that the concrete bed is solid.
Correct Chain Installation
Back of Gate

Installation

G E T T I N G S T A R T E D
M O U N T I N G O P E R A T O R
10"
8"
15"
C H A I N I N S T A L L A T I O N
Gate
4" Minimum
®
ACCESS SYSTEMS INC ACCESS SYSTEMS INC ROBO SURGE SUPPRESSOR
eliteaccess.com
CLASS 2
POWER INPUT SAFETY EXIT FIRE DEPT STRIKE OPEN RADIO SUPPLY
18 VAC LOOP LOOP KEY SWITCH PUSH BUTTON RECEIVER
Correct Chain Spacing
ACCESS SYSTEMS INC
Above
6"
Ground
Below the frost line.
Check all local codes.
20"
Incorrect Chain Installation
Front of Gate
Incorrect Chain Spacing
8
4 Concrete Anchors
1/2" x 3 1/2"
Too High
Too Low
Gate
®
ROBO SURGE SUPPRESSOR
eliteaccess.com ACCESS SYSTEMS INC ACCESS SYSTEMS INC
CLASS 2
POWER INPUT SAFETY EXIT FIRE DEPT STRIKE OPEN RADIO SUPPLY
18 VAC LOOP LOOP KEY SWITCH PUSH BUTTON RECEIVER
ACCESS SYSTEMS INC