Aerial Reception Settings (Channel); Channel Scan; Edit Channel - Sony SVR-HDT1000 Operating Instructions Manual

Aerial Reception
Settings (Channel)

Channel Scan

Full Rescan
Erases all the registered channels and scans
the channels again.
1
Enter your four-digit password using the
number buttons.
2
Select "Yes" using </,, and press
.
The recorder starts scanning the
channels.
3
Select "Save" using M/m, and press
Update Scan
Scans for newly available channels.
1
Enter your four-digit password using the
number buttons.
The recorder starts scanning the
channels.
2
Select "Save" using M/m, and press
Manual Scan
1
Enter your four-digit password using the
number buttons.
2
Set "Channel" and "Frequency" using
M/m and
3
Select "Scan" using M/m, and press
The recorder starts scanning the
channels.
4
Select "Save" using M/m, and press
b
• After "Full Rescan," select your region using
</M/m/, if necessary.
• Scanning may take time depending on your
region.
• When you set channels using "Full Rescan," the
timer settings in the "Timer list" will be erased.
36
.

Edit Channel

Edit Channel List
Erases or locks channels in the "Channel
List."
1
Enter your four-digit password using the
number buttons.
2
Select a channel you want to edit using
M/m, and press the corresponding
colour button.
• Red button ("Remove"): Removes the
selected channel from the "Channel
List."
• Green button ("Select"): Selects the
highlighted channel.
• Yellow button ("Select All"): Selects
all the channels.
.
• Blue button ("Lock"): Locks the
selected channel.
b
Timer recording does not start while editing the
Channel List.
Before you start editing, check the "Timer list" for
any timer recordings that are due to start while
editing the Channel List.
.
Edit Favourite List
Adds, removes or groups channels in the
Favourite List.
1
Enter your four-digit password using the
number buttons.
2
Select a channel you want to edit using
</M/m/,, and press the
.
corresponding colour button.
• Red button ("Remove"/"Add"):
Removes/adds the selected channel
from/to the Favourite List.
.
• Green button ("Select"): Selects the
highlighted channel.
• Yellow button ("Select All"): Selects
all the channels.
• Blue button ("Group"): Groups the
selected channels.
Auto Service Update
On Automatically scans and
updates the "Channel List."
Off
Turns off the function.