To Select The Source; To Edit The Input Source Name - Samsung FP-T5894W Owner's Instruction Manual

I
To Select the Source
Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-Top
Box) connected to the Wireless Home AV Center. Use to select the input source of your choice.
You can name the device connected to the input jacks to make your input source selection easier.
I
1 Press the MENU button to display the menu.
Press the .& or T button to select Input, then press the ENTER button.
2 Press the ENTER button to select Source List.
Press the .& or T button to select the signal source, then press the ENTER
button.
~
You can choose between the following sets of jacks: AV1, Component1,
Component2, HDMI1 or HDMI2 on the Wireless Home AV Center's rear
panel and AV2, S-Video or HDMI3 on the Wireless Home AV Center's front
panel.
~
HDMI1, HDMI2 or HDMI3 input can only be selected when the external
device is turned on and connected via HDMI.
~
You can choose only those external devices that are connected to the
Wireless Home AV Center.
~
You can also press the SOURCE button on the remote control to view an external
signal source.
To Edit the Input Source Name
1 Press the MENU button to display the menu.
Press the .& or T button to select Input, then press the ENTER button.
Press the .& or T button to select Edit Name, then press the ENTER button.
2 Press the .& or T button to select AV1, AV2, S-Video, Component1,
Component2, HDMI1, HDMI2 or HDMI3 input jack, then press the ENTER
button.
3 Press the .& or T button to select VCR, DVD, D-VHS, Cable STB, HD STB,
Satellite STB, PVR STB, AV Receiver, DVD Receiver, Camcorder, DVD
Combo, VOD STB or TV input source, then press the ENTER button.
Press the EXIT button to exit.
.[
~
=
~
.
e£®
0-..,
---------~----~----~-----------