Samsung FP-T5894W Owner's Instruction Manual page 92

Turning the TV and Wireless
Home AV Center On and Off
Press the POWER button on the remote control.
The TV and Wireless Home AV Center will be turned on and
you will be able to use their features. You can also use the
Power button on the front of the TV
-- If your TV and Wireless Home AV Center Isn't turned on
when the Power button is pressed' Press the TV button
on the remote to check if the TV mode has been chosen.
Memorizing the Channels
Your TV can memorize and store all of the available channels
for both air and cable channels. After the available channels
are memorized, use the CH A and CH V button to scan
through the channels. This eliminates the need to change
channels by entering the channel digits. There are three
steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting
channels (manual).
Viewing the Menus
Viewing the Menus and Displays
Your TV has a simple, easy-to-use menu system that appears
on the screen. This system makes it convenient and fast to
use the TV's features.
The TV also displays the status of many features.
Selecting a broadcast source
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the Wireless Home AV Center(Le., an air or a
cable system).
Press the MENU button.
Press the A or T button to select Channel, then
press the ENTER button.
Press the A or T button to select Antenna, then
press the ENTER button.
o
With the power on, press the MENU button on the
remote control. The main menu will appear at the
bottom of the screen. The Picture menu is selected.
Press the A or T button, then press the ENTER
button to select an item you want in the menu.
Press the AI T I
~/~
IENTER button to display,
change, or use the selected items.
Press the ENTER button to enter items in the menu.
On screen menus disappear from the screen
automatically after about two minutes or you can
press the EXIT button on the remote control to exit
from the menu.
o
fA
Press the A or T button to select Air or Cable,
then press the ENTER button.
2
TV
,.
•
---~CtJannel_--
1--_]
Auto Program Cable
Channel List
S9nal Strength
LNA On
~-Move
GEnter
6
Retum
RETURN
@
N'O
o
CAPOON
o
Displaying Status Information
Press the INFO button on the remote control.
The TV will display the Picture mode, Sound mode, MTS,
Caption, V-Chip, and Current Time.
- The information Window automatically disappears
after a few seconds, Press the INFO button once to
manually close the window.
Press the A or T button to select Auto Program,
then press the ENTER button.
-- All available DTV (Digital TV) and analog channels
are automatically stored in memory.
English - 11