Auto Wall-Mount Adjustment (Sold Separately); (Fp-T5094W) - Samsung FP-T5894W Owner's Instruction Manual

I
Auto Wall-mount adjustment (Sold separately)
(FP-T5094W)
Once the auto wall mount is installed, the position of your TV can be easily adjusted.
TV Rear Panel
Auto Wall-Mount
I
(63)
e
""K<
"1-"' - -------' - --../
o
EX·L1NK Cable (Not supplied)
P.MOOE S.MOOE
sm
P.S~E
:
----~:
DG!DCJ~]
I:
FAV.CH AUTO PROG. ADDIDEL eH :
D D D G ] :
___________ ~~ Olll>.~ • ;
Entering the menu
1 Press the A, ... , .... or
~
button on your remote control.
~
The Wall.Mount Adjustment screen is displayed.
~
If the Wall Mount Adjustment screen is not displayed when clicking on a
direction button while watching your TV, use the menu to display that screen .
• Press the MENU button to display the menu. Press the A or ... button to
select Setup, then press the ENTER button .
• Press the A or ... button to select Wall-Mount Adjustment, then press the
ENTER button.
Remembering the Position
2 Adjust to the desired position using the A, ... ,.... ,
~
buttons.
~
If you press an arrow button when no OSO is displayed on the TV screen, the
Adjustment screen appears.
~
Press the INFO button to reset. Press the .... or
~
button to select Yes, then
press the ENTER button. The position is initialized to the default setting.
3 Press the Blue button.
Press the A and'" buttons to select a save mode from either Position1, Position2
or Position3 in order to save the current position.
~
To not save the current position, press the RETURN button.
~
When selecting a save mode, you cannot use the Color buttons.
4 Press the ENTER button to save.
~
When Position1 is selected, the message Current position saved as
Position1 is displayed.
5 Press the ENTER button.
~
The saved Position appears on the left side of the OSO.
Moving to the remembered position
1 Complete Step 1 of Entering the menu.
2 Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the
saved position.
~
You can move the wall mount to one of the 3 pre-set positions by pressing the
Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
~
If you adjust the positon after moving to a pre-set position, the position display
will disappear.
~
For installation, refer to the Installation Manual provided with the wall mount.
~
For product installation and the installation and moving of the wall mount, make
sure to consult a specialized installation company.
~
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
~
The auto wall mount will not work when Anynet+ is operating.