To Select The Source; To Edit The Input Source Name - Samsung FP-T5084 Owner's Instructions Manual

Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-Top
Box) connected to the TV. Use to select the input source of your choice.
I
To Select the Source
1 Press the MENU button to display the menu.
Press the .& or 'f button to select Input, then press the ENTER button.
2 Press the ENTER button to select Source List.
Press the .& or 'f button to select the signal source, then press the ENTER
button.
~
You can choose between the following sets of jacks: AV1, S-Vide01,
Component1, Component2, PC, HDMI1 or HDMI2 on the TV's rear panel
and AV2, S-Vide02, or HDMI3 on the TV's side panel.
~
HDMI1, HDMI2 or HDMI3 input can only be selected when the external
device is turned on and connected via HDMI.
~
You can choose only those external devices that are connected to the TV.
----[-_
.. _-----------------------------~-----
POWER SOURCE
eo:r®
O~I
---------~---~---~-----------
You can name the device connected to the input jacks to make your input source selection easier.
~
You can also press the SOURCE button on the remote control to view an external
signal source.
I
To Edit the Input Source Name
1 Press the MENU button to display the menu.
Press the .& or 'f button to select Input, then press the ENTER button.
Press the .& or 'f button to select Edit Name, then press the ENTER button.
2 Press the .& or 'f button to select AV1, AV2, S-Video1, S-Video2,
Component1, Component2, PC, HDMI1, HDMI2 or HDMI3 input jack,
then press the ENTER button.
3 Press the .& or 'f button to select VCR, DVD, D-VHS, Cable STB, HD STB,
Satellite STB, PVR STB, AV Receiver, DVD Receiver, Game, Camcorder,
DVD Combo, PC, VOD STB or TV input source, then press the ENTER button.
Press the EXIT button to exit.
~
When a PC with a resolution of 1920 x 1080@60Hz is connected to the
HDMIIN 1 port, you should set the HDMI1 mode to PC in the Source List of
the Input mode. If the HDMI1 mode is not PC, it works depending on the TV
setting.
Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-Top
Box) connected to the TV. Use to select the input source of your choice.
I
To Select the Source
1 Press the MENU button to display the menu.
Press the .& or 'f button to select Input, then press the ENTER button.
2 Press the ENTER button to select Source List.
Press the .& or 'f button to select the signal source, then press the ENTER
button.
~
You can choose between the following sets of jacks: AV1, S-Vide01,
Component1, Component2, PC, HDMI1 or HDMI2 on the TV's rear panel
and AV2, S-Vide02, or HDMI3 on the TV's side panel.
~
HDMI1, HDMI2 or HDMI3 input can only be selected when the external
device is turned on and connected via HDMI.
~
You can choose only those external devices that are connected to the TV.
----[-_
.. _-----------------------------~-----
POWER SOURCE
eo:r®
O~I
---------~---~---~-----------
You can name the device connected to the input jacks to make your input source selection easier.
~
You can also press the SOURCE button on the remote control to view an external
signal source.
I
To Edit the Input Source Name
1 Press the MENU button to display the menu.
Press the .& or 'f button to select Input, then press the ENTER button.
Press the .& or 'f button to select Edit Name, then press the ENTER button.
2 Press the .& or 'f button to select AV1, AV2, S-Video1, S-Video2,
Component1, Component2, PC, HDMI1, HDMI2 or HDMI3 input jack,
then press the ENTER button.
3 Press the .& or 'f button to select VCR, DVD, D-VHS, Cable STB, HD STB,
Satellite STB, PVR STB, AV Receiver, DVD Receiver, Game, Camcorder,
DVD Combo, PC, VOD STB or TV input source, then press the ENTER button.
Press the EXIT button to exit.
~
When a PC with a resolution of 1920 x 1080@60Hz is connected to the
HDMIIN 1 port, you should set the HDMI1 mode to PC in the Source List of
the Input mode. If the HDMI1 mode is not PC, it works depending on the TV
setting.