Table of Contents
Advertisement
There is no iPod connected.
Please connect the iPod.
USB memory device contains Insert USB memory device containing audio files.
no audio files.
Device mechanism is
The unit's mechanism may be damaged. Consult
damaged.
your dealer.
Disconnect the iPod, then connect it again.
Eject the disc and replace correct region code disc.
Set the correct Parental level.
Eject the disc then reload it properly.
This is a failure of DVD mechanism and consult your
store of purchase.
Retry or replace with a non-scratched, non-warped-
disc.
Replace with a non-scratched, non-warped disc.
Eject the disc then reload it properly.
Replace with a non-scratched, non-warped-disc.
This is a failure of CD changer's mechanism and
consult your store of purchase.
Eject the disc then reload it properly.
This is a failure of CD deck's mechanism and consult
your store of purchase.
A DISC inside the DVD
changer cannot be played
because it is loaded upside-
down.
A DISC cannot be played due
to scratches, etc.
Parental level error
A DISC inside the DVD
changer cannot be played.
USB connector is short-
Disconnect USB memory device, then hold [SRC]
circuited or USB memory
button depressed to turn power OFF. Then press
device is overloaded.
[SRC] button once again to turn power ON.
A communication error
occurs between the iPod and
the iPod CeNET Controller.
Region code error
A CD inside the CD changer
cannot be played due to
scratches, etc.
A CD inside the CD changer
is not loaded.
A CD inside the CD changer
cannot be played because it
is loaded upside-down.
A CD cannot be played due
to scratches, etc.
A CD is loaded upside-down
inside the CD deck and does
not play.
A CD is caught inside the CD
deck and is not ejected.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
DXZ575USB
35
Advertisement
Table of Contents
