Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
5. DCP The control panel can be detached to prevent theft. When detaching the control panel, store it Be sure to close the HOLD FLAP for safety in the DCP (DETACHABLE CONTROL PANEL) when removing the DCP. case to prevent scratches. We recommend taking the DCP with you when leaving the car.
6. REMOTE CONTROL Operating range: 30˚ in all directions Signal transmitter Remote control unit [ FUNC ] [ ISR ] [ MUTE ] [ SCN ] [ RPT ] Inserting the Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow.
7. OPERATIONS Note:Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “3. CONTROLS” on page 5 (unfold). Adjusting the volume CAUTION Turning the [ROTARY] knob clockwise in- Be sure to lower the volume before switch- creases the volume;...
Radio Operations Basic Operations Adjusting the Z-Enhancer Plus FM reception 1. Press the [Z+] button and select the Z-En- For enhanced FM performance the hancer Plus mode to adjust. tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction 2.
CD Operations Loading a CD Displaying CD titles 1. Press the [OPEN] button to access the CD This unit can display title data for CD-text CDs SLOT behind the FLIP DOWN PANEL. and user titles input with this unit. 2. Insert a CD into the centre of the CD SLOT 1.
∗ The factory default setting is “ON”. * The factory default setting is “WELCOME TO 1. Press and hold the [T] button for 1 second or CLARION”. longer to switch to the adjustment selection 1. Press and hold the [T] button for 1 second or display.
∗ This function is not compatible with all cellular 1. Press the [FNC] button to select the mode telepones Contact your local authorized Clarion dealer for information on proper installation and you want to enter a title (CD, CD changer or compatibility.
CD/MD Changer Operations Selecting a MD 2. To cancel disc scan play, press the [SCN] button again. “DISC” and “SCN” go off from [DN] or [UP] button correspond to a MD load in the display and the current track continues to the MD changer.
TV Operations Auto store Setting the TV area Auto store selects 6 TV stations automatically When you select the TV area (TV reception and stores each one into preset memory. area), the TV tuner area setting changes. If there are not 6 stations with good reception, 1.
10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Error Display Cause ERROR 2 A CD is caught inside the CD deck and is not ejected. ERROR 3 A CD cannot be played due to scratches, etc.
11. SPECIFICATIONS FM Tuner Audio Frequency Range: Maximum Power Output: 208 W (52 W ✕ 4 ch) 87.0 MHz to 108 MHz Usable Sensitivity: Continuous Average Power Output: 17 W ✕ 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD 9 dBf 50dB Quieting Sensitivity: Bass Control Action (60 Hz):...