Satellite Radio Operations - Clarion DXZS1SUSB Owner's Manual

I
Satellite Radio Operations
This function is available when a Satellite Radio
Receiver is connected through the CeNET
cable.
This unit can control the following satellite radio
receivers:
• XM Satellite Radio Receiver: XMD1000
• XM Smart Digital Adapter: XM SDA
• SIRIUS Satellite Radio Receiver: SIRCL2,
SIRCL3
Note:
• When the function is differ depending to the
connected receiver, they are distinguished by the
following notations:
'XM": for an
XM
Satellite Radio Receiver
"SIRIUS": for
a
SIRIUS Satellite Radio Receiver
Selecting a Satellite Radio mode
1. Press the [SRC] button.
The system changes to the specified
Satellite Radio mode.
Selecting
a
band
1. Press the [MENU] button to select a band.
This changes the reception band as follows:
• XM: XM1
~
XM2
~
XM3 -. XM1 ...
• SIRIUS: SR1
~
SR2
~
SR3
~
SR1 ...
• Information displayed during reception
The following information is displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time
or after a reset: "UPDATING"
• When a channel is being tuned in (no signal is
yet received):
XM: "LOADING", SIRIUS: "ACQUIRING"
• A channel without a broadcast has been
selected:
XM: "--- CH", SIRIUS: "INVALID CH"
• A channel not
covered
by your contract:
XM: "UPDATING", SIRIUS: "CALL 888"
H
"539-SIRI" (alternated)
• When your contract is expired: "SUB
UPDATE"
28
DXZ575USB
Confirming your SIRIUS ID
1. Press the [OPTION] button.
2. Push the [SEEK PANELlleftward or
rightward to select "SID DISP".
3. Press the [UP] or [ON] button.
Your SIRIUS 10 will be displayed 6 digits
number.
4. To return to the previous mode, press the
[OPTION] button.
Displaying channel labels
1. Press the [0] button to select the desired
channel label.
Channel -. Category -. Artist ~ Title ~
Radio text -. Channel. ..
Channel selection
1. Channels are selected with the [SEEK
PANEL].
*
For details,
see
the following operation
descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
Tuning mode
There are two channel selection modes: quick
tuning mode and step tuning mode.
• Quick tuning
1. Push the [SEEK PANEL] leftward or
rightward and hold in position for 1 second or
longer.
• Step tuning
1. Push the [SEEK PANEL] leftward or
rightward.