Standard Horizon Matrix GX2000 Owner's Manual page 69

4. Rotate the CHANNEL knob to select the
name in the directory, then press the [ SE-
LECT ] soft key.
5. Press the [ YES ] soft key to send your posi-
tion to the selected vessel.
6. Press the [ QUIT ] key to return to radio opera-
tion.
Manual Calling
This feature allows you to send your position to another vessel by manually
entering the MMSI of the ship you want to send your position to.
1. Press the [ CALL ( MENU )] key. The "DSC
Menu" will appear.
Menu Menu
Menu Menu
2. Rotate the CHANNEL knob to select "POS RE-
PORT". (To cancel, press the [ QUIT ] soft key.)
PORT PORT
PORT PORT
3. Press the [ SELECT ] soft key. The transceiver will
beep, and the "Position Report Call" menu will ap-
pear.
4. Rotate the CHANNEL knob to select
MANUAL", then press the [ SELECT ] soft key.
"MANUAL
MANUAL MANUAL
MANUAL
5. Rotate the CHANNEL knob to select the first
number of the MMSI (nine digits: first digit per-
manently set to "0") which you want to con-
tact, then press the [ SELECT ] soft key to step
to the next number.
6. Repeat step 5 to set the MMSI number.
7. If a mistake was made entering in the MMSI num-
ber, repeat pressing the [ BACK ] soft key un-
til the wrong number is selected, then rotate
the CHANNEL knob to correct the entry.
8. When finished entering the MMSI number,
press and hold the Press the [ SELECT ] soft key.
9. Press the [ YES ] soft key to send your position to the selected vessel.
10. Press the [ CLR ( WX )] key to return to radio operation.
GX2000/GX2100
DSC DSC DSC DSC
POS RE- POS RE- POS RE- POS RE-
Page 69