Figure 2-7. Removing The Keyboard Cover - HP Omnibook XE4100 Service Manual

4. If necessary, while holding the center of the cover, carefully insert the flat-blade screwdriver under
the right side of the display assembly hinge, gently pry up, and then lift the cover out. This
procedure might need to be repeated on the left side of display assembly hinge to completely
remove the cover.
Screw, M2.5×4mm (2)
Reassembly Note
• Insert the tabs on the left- and right-center of the panel into the mating slots under the keyboard,
and then press the panel into place.
HP Omnibook XE4100/XE4500

Figure 2-7. Removing the Keyboard Cover

Removal and Replacement 2-11