Advertisement
CD Ripping
1. The source CD (Audio CD, AVI,XVID) must be in good condition and not
scratched or warped. The DVD player should be able to play it smoothly.
2. The destination USB flash drive must be compatible with the DVD player (up to
16GB, formatted in FAT/FAT32 file system).
1. In DVD Mode, load and play the CD.
2. Plug the destination USB flash drive into the unit.
3. Press the COPY button on the remote control to
display the CD ripping menu on the screen. (FIGURE 1)
4. Adjust your CD ripping preferences by using the arrow
buttons and ENTER button:
- Speed: Ripping speed. FAST mode rips quicker but the
audio will not be played.
- Bitrate: Higher bitrate gives better quality audio but
larger files.
- Create ID3: Choose whether to have ID3 tags attached
to the ripped files.
- Device: Displays the connected memory device.
5. Highlight and press ENTER to select the desired tracks.
"Select All" will select all the tracks. "Select None" will
uncheck all the tracks.
6. After the track selection, select the "Start" option to
start ripping. The ripping progress screen will display.
(FIGURE 2)
7. After ripping is complete, select "Exit" to quit the CD
ripping menu.
8.To stop ripping while it is in progress, select the
"Cancel" option.
VIDEO FILE COPY
1. In DVD Mode, load and play the AVI CD.
2. Plug the destination USB flash drive into the unit.
3. Press the COPY button on the remote control to display
the video copy menu on the screen. (FIGURE 3)
4
Move the cursor to the video file you'd like to copy and
or deselect all tracks
down the track list.
5. After the track selection, select the "Copy" option to
proceed. Adjust settings if needed, then proceed again
to start the copy function. (FIGURE 4 & 5)
6. To stop copying while it is in progress, select the
"Cancel" option.
VIDEO FILE COPY
if needed to view further
select
19
Hide quick links:
Advertisement
