Turning the power on
ClarIon
System check
The CeNET format utilized on this unit is
provided with a system check function. When
the system check function is performed
under the following conditions, the power is
automatically turned off. Press the [0]
(POWER) button again.
-When power is first turned on after initial
installation.
-When an external device is connected or
disconnected.
-When the [RESET] button is pressed.
*In addition to the above conditions, the
system check function can be performed
from the GENERAL menu in the ADJUST
mode.
• •
•
-You can change the media
sources.
MAX675VD
7