Table of Contents
Advertisement
DVD Changer Operations
Only basic operations of DVD changer can be
performed from the unit. Use the remote control
unit to perform the following functions.
• Scan, Repeat, Random functions
• Video CD Playback function ON/OFF
• DVD Setup function, Audio, Subtitle, Angle
setting function
For details on operations other than those
described below, see the pages of "DVD Video
Player Operations".
For details on DVD changer precautions, refer to
the supplied owner's manual.
Note:
• When the
0
VD changer (VCZ625) is connected via
optical cable, no sound will be output if AUDIO
OUT is switched to ANALOG on the changer's
"GENERAL SETUP" menu.
TV Operations
TV functions
To watch TV, requires a TV tuner. When an
optional TV tuner is connected through the CeNET
cable, this unit controls all TV tuner functions.
A
WARNING
For your safety, the driver should not watch
the TV or operate the controls while driving.
Please note that watching and operating
the TV while driving are prohibited by law in
some countries.
Watching TV
Note:
• For your safety, the MAX675VD has
a
safety
function which turns off the picture when the car is
moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking brake is applied.
• If "AUDIO ONL Y" appears on the screen just after
turning on the ACC power of the car, release the
parking brake while confirming safety, and then
engage the parking brake again.
1. Press the [SRC] button, and touch the
[TELEVISION] key.
2. Press the [BAND] button or touch the [BandI
key to select the desired TV band (TV1 or
TV2).
Every pressing the button toggles the TV
band between TV1 and TV2.
3. Press the [I......] or
[~I]
button to tune in the
previous or next preset TV station.
• Set the 'TV TYPE" of the DVO changer's
"GENERAL SETUP" menu to the same setting as
that set in the "Switching the VTR system
between NTSC and PAL" of this unit.
Selecting
a
disc from the list
1. Touch the [List] key.
2. Touch the corresponding Disc key (1 to 6) to
select the desi red disc.
The disc changes to the specified disc.
Switching to
a
next disc (Disc Up
function)
1. The disc up function plays from the first track
(track No.1) of the next disc.
Press the [BAND] button.
Each time you press the [BAND] button, the
disc changes to the next disc.
Watching
a
video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
1. Touch the screen to display the TVIVTR mode
menu, then touch the [Option] key.
2. Touch the [VTR] key to change to the VTR
mode.
• To return to the TV broadcast, perform the
same operation again.
Seek tuning
1. Press the [BAND] button or touch the [Band]
key to select the desired TV band (TV1 or
TV2).
,~
If "MANU" is displayed in the display, press
and hold the [BAND] button for more than 1
second. "MANU" in the display goes off.
2. Touch the
[«]
or
[»]
key to automatically
seek a station.
• Touching the
[»]
key to tune up the channel
to the next available TV station, and the
[«j
key to tune down.
52
MAX675VD
Advertisement
Table of Contents
