Wiring Diagram; Replacement Parts List - Travis Industries 36 CF II Owner's Manual

22

Wiring Diagram

Battery Box
(external junction box)
Battery Wires
Red and White Wires
Gas Control Valve
Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause
improper and dangerous operation.

Replacement Parts List

Caution: Use only Travis Industries replacement parts. Do not use substitute materials.
Warning: Do not operate appliance with the glass front removed, cracked, or broken.
Replacement of the glass should be done by a licensed or qualified service person.
© Travis Industries
Maintenance
Learn Wires
Two White Wires
Motor Wires (for flame height adjustment)
Red, Yellow, White, and Blue wires
AC Adapter
(wire orientation does not matter)
Brown Switch
Wires (not
Main Burner Control Wires
Pilot Flame Control Wires
Receiver
Module
used)
White
Green
Orange
White
4100519
Pilot Assembly
Igniter ("I") Wire
(Orange - with
fiberglass
insulation)
Sensor ("S")
Wire (White)
Make sure continuous pilot
a
is set to "OFF" and remote
Black
is set to "REMOTE".
Ground
100-01198_001