Travis Industries 36 CF II Owner's Manual page 11

MAIN FUNCTION (Main Burner)
The burner flame height may be adjusted from low "1" to high "3". Use the arrow keys to adjust the
setting. Once the desired setting is made, the remote will alter the setting after approximately 8
seconds (and the remote display will stop blinking).
NOTE: The fireplace must be on (either manual or thermostat) to adjust the main burner.
REAR FUNCTION (Rear Burner – Not Used)
This function is not used on this fireplace
FAN FUNCTION (not used for this fireplace)
This function is not used on this fireplace
LIGHT FUNCTION (not used for this fireplace)
This function is not used on this fireplace
AUX FUNCTION (not used for this fireplace)
This function is not used on this fireplace.
TIMER FUNCTION
The timer function allows you to turn the fireplace on from 10 to 180 minutes. Use the arrow keys
to select the desired time. The fireplace will then turn off after the specified time. Once the
desired setting is made, the remote will alter the setting after approximately 8 seconds (and the
remote display will stop blinking).
NOTE: The fireplace must be in manual mode, and on, for the timer function to work.
© Travis Industries
Operation
4100519
11
100-01198_001