Impex MARCY MWM 800 Owner's Manual page 13

STEP 3 (See Diagram 3)
A.) Attach the Front Press Lock Pin (#22) to the Vertical Beam (#4). Secure it with one M8 x 2 ½"
Allen Bolt (#64), two
End Cap (#35) to the front opening on the Vertical Beam.
B.) Plug two ½" Metal Bushings (#72) onto the side-holes on the Upper Frame (#6). Attach the
Front Press Base (#9) to the Bushings. Secure it with one ½" x 6 1/8" Allen Bolt (#56), two
½" Washers (#78), and one ½" Aircraft Nut (#75). Flip down the Lock Pin (#22) to lock the
Front Press Base for Butterfly exercise only. Flip up the Lock Pin for Front Press exercises.
C.) Plug two ½" Metal Bushings (#72) to the pivot on the Butterfly Bracket (#10). Attach the
Butterfly Bracket to the Front Press Base. Secure it with one ½" x 4 1/8" (#57) Allen Bolt (#57),
two ½" Washers (#78), and one ½" Aircraft Nut (#75). Repeat the same procedure to install
the other side.
D.) Secure the Backrest Board (#21) to the Vertical Beam (#4) with four M8 x 2 ½" Allen Bolts
(#66) and 1/4" Washers (#76).
¼" Washers (#76), and one M8 Aircraft Nut (#73). Plug a 1 ½" Square
12