Dc-In Jack - Toshiba Qosmio X300 Maintenance Manual

Error! Style not defined. Error! Style not defined.
4.12

DC-in jack

Removing the DC-in jack according to the following procedures and Figure 4-19.
1. Put right hand to touch the rib on the wall of the bottom case wall.
2. Put left hand to hold DC-in jack on 2 sides (inside and outside).
3. Push wall of bottom case by right hand (1) and rotate DC-in jack to apart by left hand (2).
Qosmio X300 Maintenance Manual
Figure 4-19 Removing the DC-in jack
4 Replacement Procedures
4-35