Toshiba Qosmio X300 Maintenance Manual page 155

Error! Style not defined. Error! Style not defined.
2. Remove the HDD pack by pulling on the tab attached to the pack, following the direction
of the arrows.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
3. Place the HDD pack on a flat surface such as a desk.
4. To separate the chassis from the HDD, remove four M3x3 screws.
CAUTION: Do not apply pressure to the top or bottom of the drive.
Qosmio X300 Maintenance Manual
Figure 4-3 Removing the HDD chassis
4 Replacement Procedures
4-11