Assigning Titles - JVC KW-XG506 Instructions Manual

Indication Item
( : Initial)
AUX ADJ A.ADJ 00 —
Auxiliary input A.ADJ 05
level adjustment
TAG DISP • TAG ON
Tag display • TAG OFF
AMP GAIN • LOW PWR
Amplifier gain
control • HIGH PWR
IF BAND • AUTO
Intermediate
frequency band • WIDE

Assigning titles

You can assign titles to 30 station frequencies (FM and
AM) and up to 8 characters for each title.
~
Select "FM/AM."
Ÿ
Show the title entry screen.
!
Assign a title.
1
Select a character (see page 23).
2
Move to the next (or previous) character
position.
Setting, [reference page]
: Adjust the auxiliary input level accordingly, to avoid the sudden increase
of the output level when changing the source from external component
connected to the AUX input jack on the control panel.
: Shows the tag while playing MP3/WMA tracks.
: Cancels.
: VOL 00 – VOL 30 (Select if the maximum power of each speaker is less
than 50 W to prevent damaging the speaker.)
: VOL 00 – VOL 50
: Increases the tuner selectivity to reduce interference noises between
adjacent stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but sound quality
will not be degraded and the stereo effect will remain.
3
⁄
Finish the procedure.
To erase the entire title
In step Ÿ on the left...
1 2
Repeat steps and until you finish
entering the title.
SETTINGS
(Exit from the
setting.)
19