Other Main Functions; Assigning Titles To The Sources - JVC EXAD KD-SHX701 Instructions Manual

Other Main Functions

○ ○ ○ ○ ○ ○ ○ ○ ○

Assigning titles to the sources

You can assign titles to 40 CDs (both in this
unit and in the CD changer), and the external
component.
Source
CDs:
External component: 16 characters
• You cannot assign a title to CD Text, MP3,
and WMA discs.
• For available characters, see page 62.
1
Prepare the source.
• For a CD in this unit: Insert a CD.
• For CDs in the CD changer: Select
"CD-CH," then select a disc number.
2
After playback starts...
MENU
3
Move the cursor to "TITLE" on the
Main Menu.
4
Enter the TITLE Menu.
OK
BAND
Ex. When you have selected "CD" and assign
a title to the loaded disc
42
Maximum number
32 characters
The Main Menu appears on
the display.
Cursor
5
Assign a title.
1) Select a character set.
BACK
DISP
2) Enter a character.
3) Move to the next character position.
4) Repeat steps 1) to 3) until you finish
entering the title.
To erase the characters...
Hold
BACK The entire title (all entered
DISP
characters) are erased at a
time.
6
After the title entry is finished...
OK
BAND
• To cancel the title entry without
registration, press MENU.